s7horton
Responses from s7horton
| 2023 AXPONA Show Report Overall a positive experience for me. It’s been a few years since I’ve attended. I was front row center in the million dollar estelon room. I thought it sounded very good. The credo room was fun also. A stand out for me was the CSS room, excep... | |
| Restoring vintage speakers Do those meridian speakers come apart? I’m not familiar with them, but a quick google search revealed shipping could be tricky unless they can be separate from the integrated stand. | |
| Restoring vintage speakers Unfortunately, not in the Bay Area. I’m in the Midwest. Shipping isn’t out the question as I’ve done a lot of it. In my head, I’m looking for a project that is intended to preserve the original design (albeit with a different or more interestin... | |
| To Harbeth or not to Harbeth, That is the question... Everyone has different taste. I’ve auditioned Harbeth a number of times. I have lived with the P3 for a short time. I have always found them very much recessed on vocals. Because of that, they are not for me. So…. I say not to Harbeth. | |
| Micromega M-100/150 field reports Thanks for the response. The simple solution is for me to connect an extender via Ethernet. I’ll give that a try tomorrow. | |
| Micromega M-100/150 field reports I realize this thread is a little out of date, but hoping the previous contributors might be able to respond. I just got my M100 back from repair where it apparently had an “intermittent fuse case holder”, and bad “varistors”. Anyway, seems fine... | |
| Integrated stopped working It’s been unplugged for hours and replugged. While I didn’t try a new cord, I did take the cord I had been using and put it on a different piece of gear - worked as it should. Definitely an issue with the Micromega. | |
| Integrated stopped working So frustrating. It took me a while to figure out how to get the cover off.there is no internal fuse that I can see. I’m not sure how to “unplug and reset”. But, I have plugged and unplugged many times during my testing.I don’t think it’s possibl... | |
| Integrated stopped working I did unplug the amp from the power strip and go directly into the wall that I know works. Unfortunately that didn’t solve the problem. I’ll open the case tomorrow and see if there is anything obvious and let you know what I find. | |
| Integrated stopped working I checked the fuse with a multimeter tonight and it’s good. So... I don’t really want to crack open the case, but it might be my only other option. | |
| Integrated stopped working Guys, thanks for all the responses. As many have suggested, I’m gonna pull the fuse and test it.regarding the power cord, I unplugged and replugged many times with no luck. I have two other devices on this same receptacle, so I know I have power... | |
| Integrated stopped working Thanks for the response. I don’t have headphones connected or another device used for trigger. What’s weird is the red standby light should come on, but doesn’t. I could be wrong, but would think if it needed a trigger, the standby light would ... | |
| Integrated amplifier search The Micromega seems good. I’m happy with the sound quality overall, but I was hoping for more from the room correction. I’ll try it again maybe this weekend to see if I feel like it dials things in a littlebetter for me. | |
| Integrated amplifier search I landed on a Micromega M100 with MARS room correction. A little bigger in size than I had hoped, but checks every other box. Plus I can hang it on the wall vertically if I want. It arrives Monday, I’m excited to fire it up. | |
| Micromega M-100/150 field reports Just purchased an m100 with MARS. With a little luck it’ll be here before the weekend. Moving from a Parasound Halo Int. I’m geeked about trying the room correction. Everything I’ve read about it seems to be very positive. |