| |||||||
 | |||||||
| |||||||
|
|
| Licoricepizza's Responses | Posts |
|
Record-playing Rituals?
I, too, use a VPI 16.5. I also use an Onzow Endust to get any detritus off the stylus. I use the stylus cleaner once daily, but more often if needed. That, and a record clamp, . . . | 197 |
|
Vintage Denon Direct Drive Turntable
I have a Denon DP37F direct drive 'table with Sumiko Blue Point on it. It has reached 25 years (with 2 new drive motors), and works very well. I can't say enough good things . . . | 102 |
|
Best Way To Archive Vinyl On My PC
I've got a recommendation of a NuForce UDAC 2 from a good friend, but that appears to be the exact opposite of what I need, which is an analog-to=digital converter, not a digital-. . . | 68 |
|
Measuring A Capacitor
Can I just make shorting plugs with an RCA cable I don't mind sacrificing | 28 |
|
Best Album Purchase, or Best Evaluating Record
I have the David and David record too, and it is good for a lot of reasons. The lamest purchase I ever made was a Jay Ferguson cutout, back in my college days. At least it has . . . | 17 |
|
Live with A Hum vs. Buy An Outboard Phono Stage
Newbee, The phono input even hums when no phono is even there. After seeing that, I tried the shorted interconnects. When I got no hum then, I proved that the preamp wasn't at . . . | 17 |
|
Grounding Hum
I just tried the separate piece of wire trick. That didn't work. Now, I'll try moving the 'table and see what happens | 16 |
|
Shorting Plugs and Non-shorting Plugs - Wothwhile?
Actually, no, I haven't listened to the amp alone. I did,however, listen to the preamp alone (with headphones, and everything else unplugged), and I still got the hum. That, for. . . | 12 |
|
Grounding A Preamp
The TT does have 2 prong plug. To check if the TT was the offender, I completely disconnected, ground wire and all. the buzz was still there. To this untrained ear, it sounds . . . | 9 |
|
Fix My Preamp vs. Buy Phono Stage
My preamp (which sounds great with the NAD/B&K/Vandersteen combo) was purchased off of eBay for ~$115.00. Which isn't much. But all I can say is "it's good that I bought . . . | 6 |
|
NAD Remote Disassembly
I looked, but the ad didn't help me out. Thanks anyway | 2 |
|
Carver M500 Meter Issue
Sorry about the late response. The remnants of a hurricane blew through here, and my internet connection was down for a week! Anyway, I've decided to either leave it alone (the . . . | 2 |
