AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Cables > 1240931481  Start New Thread | Log In | Bookmark This
  Shunyatas New CX series
I looked for the thread where someone inquired if anyone had heard the new Shunyata power cords, but it's gone. Hence, new thread.

In the last 3 weeks, I've purchased the Python CX and then again, I got a new baby -- Viper CX.
As I said in my other post, there's no distinction between Alpha and Helix lines. It's two (slap), two (slap) two cords in 1 (apologies to the old two-mints-in-one commercial).
As I also said before, I wasn't expecting to hear a noticeable difference. BUT. BUT. I did.
Already covered the lowering of grain so that a fine mist - or grain - in the soundfield, is gone. What was the Python.
Having had to endure the Viper CX that came in 10 minutes ago on an Arcam FMJ22 while awaiting the Antique Sound Labs Flora premap's arrival, I wasn't expecting much. Got it, though, and right off the bat. Now, you may say, well, it could sound "exciting" because it's cold. And in other circumstances, I might agree. But I've had every generation of Shunyatas and none, out of the box made me cock my head like a dog who hears something nobody else can hear.
Even on the Viper (and I prefer the more expensive cords because, lets face it, they put more into them), the dynamic jump was obvious, the grain lower and more fluid--just like the Python. Obviously, I'm not going to make up stories about how the soundfield expanded: it's 10 minutes old, dummy! Like I should know from that?!?!? Suffice it to say, for $700, it made me take noitce in a way that my older Python Helix Alpha and VX didn't themselves do, right out of the box. I use the lazy ear approach: pay zero attention and see if your attention is captured despite yourself. I'm not yet captured, but I'm sure snagged. I think Shunyata surpassed their old bugaboos: a slightly soft upper midrange and lower treble (those hits on triangles not only lacked punch, they lacked transient bite and, even more, shimmer). Can't tell about the shimmer now, but I'm taking the day off work. I'm snagged ENOUGH and that works for me. '
I'd recommend starting with a Viper, because I KNOW you'll hear it, and if you can hear it from the lower cords in the range, you can expect jumps from the higher ones. One Python and One Viper today: 2 more Pythons in a couple of weeks (there goes the summer vacation in Ibiza, but given the medical things happening, I'll just have to use my imagination when I'm listening to Chabrie that I'm in sunny Spain or on Ibiza. I think with these cords, I could fool myself [don't worry, I've have the fan on to simulate the breeze]).
Try these out guys. I'm using Ushers, and driven by ASL Hurricanes and the Cambridge Audio 840C with transparent interconnects/speaker cable. (yeah, yeah, stifle yourselves. I have Shunyata speaker cable and interconnects too, but this is what's in the system at the moment and I'm HIGHLY analytical. Never change a compoenent during a controlled experiment)

Oh, one more thing: the tonal quality of groups has improved in the new iteration of cords: brass are a LITTLE golden, strings silvery, and on Balalaika, I actually heard more of the body of the instrument, which is to say, instead of just strings, there's more texture, so it doesn't sound like it could just be a guitar. Quite a jump in the line's resolution, especially the low-level resolution...Maybe it's the midbass-to-lower midrange dynamics, which SEEM more powerful. OR maybe it's the fumes from that Rogaine I just put on my scalp ...
Gbmcleod  (Reviews | Threads | Answers | This Thread)

04-28-09
  Responses (1-50 of 83)
Click title to read one, or click date to read all below it.

04-28-09   Thanks for your review. i'm glad that you are liking these n ...   Sherod

04-28-09   I'm curious how much improvement there is to be had between ...   Mb9061

04-28-09   Sherod: one thing i need to correct is what i said about bra ...   Gbmcleod

04-28-09   I've had their speaker cable (andromeda bi-wire, albeit with ...   Mb9061

04-29-09   A while back i switched out all to the helix line,taipan and ...   Digsmithd

04-29-09   I am curious how the python cx will compare to an anaconda h ...   Relentless

04-29-09   Gbmcleod - have you tried the synergistic research tesla pow ...   Dlcockrum

05-03-09   I have not tried the teslas, dl. what is your experience wit ...   Gbmcleod

05-05-09   Gbmcleod, the sr 'tesla challenge' program allows you to au ...   Dlcockrum

05-10-09   Sherod: i have a few hundred hours on the shunyatas now. so ...   Gbmcleod

05-11-09   I don't have any idea how new cx sounds like but i can tell ...   Mert

05-12-09   It's cliche saying this...but mileage varies. i' wouldn't d ...   Mb9061

05-15-09   How do new python and viper compare?   Antonkk

05-27-09   Let me ask a very loaded question. how does new python cx co ...   Indirstr8s

05-31-09   To me, this cx versus anaconda helix conundrum is huge. why ...   Vhiner

06-05-09   Antonkk: the python is richer sounding than the viper, witho ...   Gbmcleod

06-05-09   I'm impressed you are able to discern sonic differences so e ...   Juancgenao

06-07-09   If your next move is to conditioner,skip the guardian level ...   Digsmithd

06-19-09   Juan, thank you! it did help having with several pairs of s ...   Gbmcleod

06-19-09   Digsmithd - you're saying there's a huge difference between ...   Mb9061

06-20-09   Yes it was a fairly big differance,i am pluging amp and cd i ...   Digsmithd

06-20-09   I bought the 2 pythons cx. by far the best cords i ever hear ...   Antonkk

06-25-09   Hi antonkk, i am considering buying the newest hydra 8v2. ha ...   Melbguy1

06-27-09   I think my post said that i didnt believe it added brightnes ...   Digsmithd

10-10-09   Anyone have experience to compare the cx lines, like python, ...   Victor_h

10-20-09   I recently a/b'd an anaconda alpha helix and a python cx hoo ...   Vhiner

10-28-09   Has anyone tried out the new sidewinder cx model? i'm lookin ...   Sherod

11-07-09   Sherod, what you'll get is likely the performance of a pytho ...   Gbmcleod

11-07-09   Well, rather than debate about getting a new sidewinder cx o ...   Sherod

11-23-09   It's only been a couple of weeks, but i'm liking the python ...   Sherod

11-27-09   Sherod, i have the python cx on my dac after trying it on m ...   Vhiner

11-27-09   Vhiner, it's interesting that the python cx sounded bright ...   Sherod

11-27-09   I have nothing but the highest respect for shunyata's power ...   Vhiner

11-27-09   Vhiner, i'm suspecting that although these new cx series s ...   Sherod

12-08-09   Sherod, i put the cx on a hyper-break in course and burnt m ...   Vhiner

12-08-09   I'm glad to hear that things worked out for you. the python ...   Sherod

12-09-09: Vhiner
I agree! There is a three-dimensionality that is downright spooky.
Vhiner  (Threads | Answers | This Thread)


12-09-09   Yes, the 3-d effect is one of the great new attributes of th ...   Sherod

12-09-09   I think the ground is shifting on this topic..i've noticed a ...   Vhiner

12-09-09   I have also read where more and more people are seeing the i ...   Sherod

12-10-09   Sherod, couldn't have said it better!   Vhiner

12-17-09   Hi sherod: glad you guys are enjoying the cx series cords. i ...   Gbmcleod

12-17-09   That's an interesting question, gbmcleod. i have new interco ...   Sherod

12-18-09   Gbmcleod, while i haven't done any a/b comparisions while ...   Vhiner

12-27-09   Gbmcleod, what's your opinion of the sound of percussion wi ...   Sherod

01-03-10   Hi! i hope you all enjoyed your holidays :) i have been ex ...   Toffeng

01-06-10   Sherod: i find the sound of percussion to be pretty dynamic ...   Gbmcleod

01-06-10   Toffeng: sorry, i forgot to answer your question. i had brah ...   Gbmcleod

01-06-10   Hi! thanks :) i will test out two pyhton cx for the amp and ...   Toffeng

02-14-10   I have been a fan of shunyata pcs for a few years, and have ...   Guidocorona


    1 | 2 Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password