Click title to read one, or click date to read all below it.
07-10-12
Here what i usually do: take your arm off the unipivot poin ... Kgturner
07-10-12
I want to use the jig to mount the arm on a new table, there ... Testpilot
07-10-12
Actually, although the vpi jig works, the mint protractor is ... Stringreen
07-11-12
Oh, i see. i don't think the jig can be used for that functi ... Kgturner
07-10-12
Yes, second to the mint lp protractor. much more precise an ... Hiendmuse
07-11-12
Sorry for the thread hijack: i've got a mint lp coming in t ... Kgturner
07-11-12: Swanny76109
Mint directions tell you what to do for setup. Follow them exactly and be sure you have a 3x and a 8-10x loupe for setup. You need both. The magnifying glass they send sucks. You can find directions online too I believe, downloadable PDF, but they are sent with the Mint. It's good to read them ahead of time, many times, as there is much to absorb and you need to have a steady hand, good light, and follow procedures exactly. You start with the arm level. You can adjust arm height later following the correct order of setup. Take a look at Mike Fremer's 21st Century Vinyl DVD for setup of a VPI Scout. If you don't have it, you should. The Scout setup is pretty much just like the Classic table. Follow that, along with Yip's directions, and you'll be good to go and the table will sing sweetly.
PS What table are you mounting the arm to? Is it a non VPI table (ie, not the Classic table?) If so, you do need the correct spindle to pivot distance as Kgturner mentions above. Check directly with VPI customer service.
Swanny76109 (System | Threads | Answers | This Thread)
07-11-12
Is the vpi jig used only for cartridge alignment? does anyo ... Testpilot
07-11-12
My understanding is the classic 3 arm is the same as the old ... Kgturner
07-11-12
According to vinyl engine and other web sources the p2s is 2 ... Brf
07-11-12
Vpi has kinda muddied the water with their classic arms iter ... Kgturner
07-11-12
Vpi got back to me and they said 258mm for the classic serie ... Testpilot
07-11-12
I measured my classic 3 with classic 33 arm when i ordered m ... Captain_winters
|
|
