Search Buy Sell Learn MyPage

Learn > Forums > Analog > 1333635524  Start New Thread | Log In |

Benz Lp-s Frequency Resonance Problems

Hi to all, As i mentioned on another thread, i have some problems with my Lp-s on my Graham Phantom arm, i have problems with little warps. I have measssured with the Hifi News Lp and lateral i have between 8hz-5hz and vertical i don't know well as i can't see cartridge wobble or hear any distortion. But for my problem the important is the lateral test. Benz recommends medium to high mass arms but that's impossible! To get 10hz frequency resonance you need a 0 gram mass arm! I don't know if to try a Reed arm, the lightest one is 10gr effective mass and i should have 8hz Resonance frequency. Any idea? Many thanks Agucela  (Threads | Answers | This Thread) 04-05-12

Responses (1-13 of 13)

Click title to read one, or click date to read all below it. 04-05-12: Bifwynne Agucela, I have already been down carty/tonearm heartbreak lane. Pull my threads to see my history. My troubles involved matching my VPI Classic unipivot with a cartridge that also resonated in the low frequency range. Ultimately, I worked with the factory and resolved the problem. My suggestion is that you call Graham and possibly Benz and ask for their advice. I'm sure you'll figure something out. Good luck! Bifwynne  (System | Reviews | Threads | Answers | This Thread) 04-05-12   My lps is tracking flawlessly in my vpi. i had to get a wei ...   Stringreen 04-06-12   I spoke with both, graham says that the arm is able to bal ...   Agucela 04-06-12   Stringreen, did you measured with the hn lp ? what is the e ...   Agucela 04-09-12   Hmmm...i'm using the benz lps with a graham phantom supreme ...   Kmccarty 04-09-12   From the facts presented it seems probable that this particu ...   Dougdeacon 04-09-12   Doug...good suggestions. i think also that the cartridge s ...   Stringreen 04-10-12   You might want to send the cartridge back. i run an lp-s on ...   Car123 04-11-12   I send it back 2 weeks ago, everything is ok! i have send t ...   Agucela 04-11-12   And i also tried with less vtf, but nothing. i only happens ...   Agucela 04-11-12   The weight of the lps and its compliance suggest that the re ...   Tobes 04-11-12   My lps is absolutely wonderful on a vpi superscoutmaster rim ...   Stringreen 04-23-12   Mine does not have any problems on a transrotor fat bob s an ...   0thd

Post your response

Subject Your response No html, but you may use markup tags Username Members only Password