Click title to read one, or click date to read all below it.
01-14-12
Halcro great to see you trying the thread drive. the pulley ... Dover
01-14-12
Okay, i'm sure that i'm missing something hear as it relates ... Catastrofe
01-14-12
Regards, catastrofe. reverse your order of operation: 60/33. ... Timeltel
01-15-12
It's actually 1.80018... i think it's a repeating number. l ... Lewm
01-14-12
Catastrophe u missing .68 of a revolution - try 60 / 33.3333 ... Dover
01-14-12
Hi dev, i am using only two motors instead of the three. i f ... Halcro
01-14-12
Dover, is your platter the same pod material as the tw prod ... Dev
01-15-12
the raven is a lp12 "in heavy". no matter what you ... Syntax
01-15-12
Solong's observations regarding play in the raven motors fee ... 1kitch
01-15-12
It is actually 1.8 sec/rev. 33 and 1/3 rev/min divided by 6 ... Tonywinsc
01-15-12
Dear halcro: as dover i'm using thread drive for all the yea ... Rauliruegas
01-15-12
Dear raul, i did not mean to imply that i know that the time ... Lewm
01-15-12
Hi ikitch, what the heck i was going to re-package that an ... Dev
01-15-12
regardless of the accuracy of the timeline as long as it is ... Hiho
01-15-12
Ahhh the vagaries of the audiophile mentality? rather than q ... Halcro
01-16-12
I am going to borrow the timeline tomorrow. but not all my ... Lewm
01-16-12
Dev - the final audio platter material is aluminium with ver ... Dover
01-16-12
that reminds me of an old chinese saying, "ride a cow b ... Hiho
01-16-12
Lewm ~ you don't happen to own a ttweights table? i've now c ... Sksos1
01-16-12
I'll ask this question again since the other post was delete ... Tonywinsc
01-16-12
I hear you tony but it seems nobody else is or wants to pay ... Ecir38
01-16-12
Tony ~ i'd be happy with what you propose but what i see cur ... Sksos1
01-16-12
it's not an impossible expectation? have you not seen my vid ... Halcro
01-16-12
Sksos1. in a word, no. i do not own a tt weights turntable ... Lewm
01-16-12
Should have read tony's post before writing the above post. ... Lewm
01-17-12
Hi halcro, i saw your video. it is impressive how well your ... Tonywinsc
01-17-12
Let me clarify my one statement a little better. cueing up ... Tonywinsc
01-17-12
Hi tony, i have left the timeline running for an entire albu ... Halcro
01-17-12
Hi halcro, that is excellent news. so is speed accuracy so ... Tonywinsc
01-17-12
Dear tony, you wrote, "the laser mark should drift slow ... Lewm
01-17-12
Hi tony, yes....i think speed accuracy was indeed mastered o ... Halcro
01-17-12
I don't like to post without actual direct experience but he ... Ct0517
01-17-12
Hi chris, i don't believe this is a fair assessment of the d ... Halcro
01-17-12
"one point not properly addressed so far.....is how idl ... Ecir38
01-17-12
Henry - my post was not an assessment of the dd technology a ... Ct0517
01-17-12
I've got the timeline in house. on the lenco, with ac suppli ... Lewm
01-17-12
unfortunately i didn't have the timeline when i had the tt-8 ... Halcro
01-17-12
lew.......please remove the mat. slippage can be a real prob ... Halcro
01-18-12
Thanks halcro, was just wondering by chance. dang lew that w ... Ecir38
01-18-12
I would love to know the results of using a timeline on a ma ... Ketchup
01-18-12
that's easy to figure out. simply stick a piece of tape wit ... Hiho
01-18-12: Halcro
TIMELINE
Here is the video with the Timeline on the Transrotor Fat Bob which has a massive platter.
Watch how the Timeline immediately slows when the stylus is lowered?
The Timeline is also sold as a 'record weight'....although on the light side.
It is fairly easy to see if slippage is causing a problem by using the Timeline without a stylus playing firstly, then with a stylus playing on the mat and then without the mat or a different mat. It's not rocket science but this mentality of assuming the Timeline is somehow wrong and the turntable correct.......is the real problem here?
Halcro (System | Reviews | Threads | Answers | This Thread)
01-18-12
Regardless of what the speed inaccuracy is due to.......one ... Halcro
01-18-12
Hi lew - regarding the lenco l75. can you please do the test ... Ct0517
01-18-12
Hi henry i just re-read what you wrote. i am assuming when ... Ct0517
01-18-12
Actually, since the timeline is sitting on the spindle, and ... Lewm
01-18-12
Hi lew - do u have a center weight with a flat top ? bit of ... Ct0517
01-18-12
Hi chris, my statement was directed at the 'speed' of any co ... Halcro
01-18-12
Halcro, you have done a fantastic job bringing us up to spee ... Dover
01-18-12
I said it once before long ago- any tt motor that brings the ... Tonywinsc
|
|
