Click title to read one, or click date to read all below it.
01-14-12
Halcro great to see you trying the thread drive. the pulley ... Dover
01-14-12
Okay, i'm sure that i'm missing something hear as it relates ... Catastrofe
01-14-12
Regards, catastrofe. reverse your order of operation: 60/33. ... Timeltel
01-15-12
It's actually 1.80018... i think it's a repeating number. l ... Lewm
01-14-12
Catastrophe u missing .68 of a revolution - try 60 / 33.3333 ... Dover
01-14-12: Halcro
Hi Dev,
I am using only two motors instead of the three. I found that with the standard Raven belt......the speed consistency was better than with the three.
I assume that the extra belt contact on the platter has something to do with it?
The same principle should apply to the thread and yes.....Daniel did warn me about possible marking and wear on the side of the platter with the thread because of the soft Delcrin material.....but I'm prepared to accept this for the increased performance.
Hi Lew,
The Timeline is dead-on accurate as I have proved using the TT-101.
The KAB Strobe must be wrong/faulty?
I haven't listened to the Raven set up according to the strobe since I received the Timeline. All I can tell you is that the TT-101 initially blew the Raven away (sound-wise) when the Raven was set up using the KAB.
With the Raven running the thread drive on two motors and set up according to the Timeline.......the differences to the Victor are not that great.
In other words.....I can happily listen to both decks.
Dear Solong,
Thanks for the hints.
Unfortunately......my cantilevered wall shelf slopes alarmingly to the front due to the weight of the Raven....and the motors require the utmost levelling of the feet to maintain their horizontality. Feet of some sort....are a prerequisite?
Hi Dover,
The Raven motor pulleys do not seem to allow the thread to move visually up and down.
I also have some French silk thread which I can try as well. Some sexy colours also :-)
Halcro (System | Reviews | Threads | Answers | This Thread)
01-14-12
Dover, is your platter the same pod material as the tw prod ... Dev
01-15-12
the raven is a lp12 "in heavy". no matter what you ... Syntax
01-15-12
Solong's observations regarding play in the raven motors fee ... 1kitch
01-15-12
It is actually 1.8 sec/rev. 33 and 1/3 rev/min divided by 6 ... Tonywinsc
01-15-12
Dear halcro: as dover i'm using thread drive for all the yea ... Rauliruegas
01-15-12
Dear raul, i did not mean to imply that i know that the time ... Lewm
01-15-12
Hi ikitch, what the heck i was going to re-package that an ... Dev
01-15-12
regardless of the accuracy of the timeline as long as it is ... Hiho
01-15-12
Ahhh the vagaries of the audiophile mentality? rather than q ... Halcro
01-16-12
I am going to borrow the timeline tomorrow. but not all my ... Lewm
01-16-12
Dev - the final audio platter material is aluminium with ver ... Dover
01-16-12
that reminds me of an old chinese saying, "ride a cow b ... Hiho
01-16-12
Lewm ~ you don't happen to own a ttweights table? i've now c ... Sksos1
01-16-12
I'll ask this question again since the other post was delete ... Tonywinsc
01-16-12
I hear you tony but it seems nobody else is or wants to pay ... Ecir38
01-16-12
Tony ~ i'd be happy with what you propose but what i see cur ... Sksos1
01-16-12
it's not an impossible expectation? have you not seen my vid ... Halcro
01-16-12
Sksos1. in a word, no. i do not own a tt weights turntable ... Lewm
01-16-12
Should have read tony's post before writing the above post. ... Lewm
01-17-12
Hi halcro, i saw your video. it is impressive how well your ... Tonywinsc
01-17-12
Let me clarify my one statement a little better. cueing up ... Tonywinsc
01-17-12
Hi tony, i have left the timeline running for an entire albu ... Halcro
01-17-12
Hi halcro, that is excellent news. so is speed accuracy so ... Tonywinsc
01-17-12
Dear tony, you wrote, "the laser mark should drift slow ... Lewm
01-17-12
Hi tony, yes....i think speed accuracy was indeed mastered o ... Halcro
01-17-12
I don't like to post without actual direct experience but he ... Ct0517
01-17-12
Hi chris, i don't believe this is a fair assessment of the d ... Halcro
01-17-12
"one point not properly addressed so far.....is how idl ... Ecir38
01-17-12
Henry - my post was not an assessment of the dd technology a ... Ct0517
01-17-12
I've got the timeline in house. on the lenco, with ac suppli ... Lewm
01-17-12
unfortunately i didn't have the timeline when i had the tt-8 ... Halcro
01-17-12
lew.......please remove the mat. slippage can be a real prob ... Halcro
01-18-12
Thanks halcro, was just wondering by chance. dang lew that w ... Ecir38
01-18-12
I would love to know the results of using a timeline on a ma ... Ketchup
01-18-12
that's easy to figure out. simply stick a piece of tape wit ... Hiho
01-18-12
timeline here is the video with the timeline on the transr ... Halcro
01-18-12
Regardless of what the speed inaccuracy is due to.......one ... Halcro
01-18-12
Hi lew - regarding the lenco l75. can you please do the test ... Ct0517
01-18-12
Hi henry i just re-read what you wrote. i am assuming when ... Ct0517
01-18-12
Actually, since the timeline is sitting on the spindle, and ... Lewm
01-18-12
Hi lew - do u have a center weight with a flat top ? bit of ... Ct0517
01-18-12
Hi chris, my statement was directed at the 'speed' of any co ... Halcro
01-18-12
Halcro, you have done a fantastic job bringing us up to spee ... Dover
01-18-12
I said it once before long ago- any tt motor that brings the ... Tonywinsc
|
|
