AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Analog > 1320876538  Start New Thread | Log In | Bookmark This
  Turntable speed accuracy
  Responses (251-300 of 573)
Click title to read one, or click date to read all below it.

01-14-12   Halcro great to see you trying the thread drive. the pulley ...   Dover

01-14-12   Okay, i'm sure that i'm missing something hear as it relates ...   Catastrofe

01-14-12   Regards, catastrofe. reverse your order of operation: 60/33. ...   Timeltel

01-15-12   It's actually 1.80018... i think it's a repeating number. l ...   Lewm

01-14-12   Catastrophe u missing .68 of a revolution - try 60 / 33.3333 ...   Dover

01-14-12   Hi dev, i am using only two motors instead of the three. i f ...   Halcro

01-14-12   Dover, is your platter the same pod material as the tw prod ...   Dev

01-15-12   the raven is a lp12 "in heavy". no matter what you ...   Syntax

01-15-12   Solong's observations regarding play in the raven motors fee ...   1kitch

01-15-12   It is actually 1.8 sec/rev. 33 and 1/3 rev/min divided by 6 ...   Tonywinsc

01-15-12   Dear halcro: as dover i'm using thread drive for all the yea ...   Rauliruegas

01-15-12   Dear raul, i did not mean to imply that i know that the time ...   Lewm

01-15-12   Hi ikitch, what the heck i was going to re-package that an ...   Dev

01-15-12   regardless of the accuracy of the timeline as long as it is ...   Hiho

01-15-12   Ahhh the vagaries of the audiophile mentality? rather than q ...   Halcro

01-16-12   I am going to borrow the timeline tomorrow. but not all my ...   Lewm

01-16-12   Dev - the final audio platter material is aluminium with ver ...   Dover

01-16-12   that reminds me of an old chinese saying, "ride a cow b ...   Hiho

01-16-12   Lewm ~ you don't happen to own a ttweights table? i've now c ...   Sksos1

01-16-12   I'll ask this question again since the other post was delete ...   Tonywinsc

01-16-12   I hear you tony but it seems nobody else is or wants to pay ...   Ecir38

01-16-12   Tony ~ i'd be happy with what you propose but what i see cur ...   Sksos1

01-16-12   it's not an impossible expectation? have you not seen my vid ...   Halcro

01-16-12   Sksos1. in a word, no. i do not own a tt weights turntable ...   Lewm

01-16-12   Should have read tony's post before writing the above post. ...   Lewm

01-17-12   Hi halcro, i saw your video. it is impressive how well your ...   Tonywinsc

01-17-12   Let me clarify my one statement a little better. cueing up ...   Tonywinsc

01-17-12   Hi tony, i have left the timeline running for an entire albu ...   Halcro

01-17-12   Hi halcro, that is excellent news. so is speed accuracy so ...   Tonywinsc

01-17-12   Dear tony, you wrote, "the laser mark should drift slow ...   Lewm

01-17-12   Hi tony, yes....i think speed accuracy was indeed mastered o ...   Halcro

01-17-12   I don't like to post without actual direct experience but he ...   Ct0517

01-17-12   Hi chris, i don't believe this is a fair assessment of the d ...   Halcro

01-17-12   "one point not properly addressed so far.....is how idl ...   Ecir38

01-17-12   Henry - my post was not an assessment of the dd technology a ...   Ct0517

01-17-12   I've got the timeline in house. on the lenco, with ac suppli ...   Lewm

01-17-12   unfortunately i didn't have the timeline when i had the tt-8 ...   Halcro

01-17-12   lew.......please remove the mat. slippage can be a real prob ...   Halcro

01-18-12   Thanks halcro, was just wondering by chance. dang lew that w ...   Ecir38

01-18-12   I would love to know the results of using a timeline on a ma ...   Ketchup

01-18-12   that's easy to figure out. simply stick a piece of tape wit ...   Hiho

01-18-12   timeline here is the video with the timeline on the transr ...   Halcro

01-18-12   Regardless of what the speed inaccuracy is due to.......one ...   Halcro

01-18-12   Hi lew - regarding the lenco l75. can you please do the test ...   Ct0517

01-18-12   Hi henry i just re-read what you wrote. i am assuming when ...   Ct0517

01-18-12   Actually, since the timeline is sitting on the spindle, and ...   Lewm

01-18-12   Hi lew - do u have a center weight with a flat top ? bit of ...   Ct0517

01-18-12   Hi chris, my statement was directed at the 'speed' of any co ...   Halcro

01-18-12   Halcro, you have done a fantastic job bringing us up to spee ...   Dover

01-18-12   I said it once before long ago- any tt motor that brings the ...   Tonywinsc


< Prev 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password