|Click title to read one, or click date to read all below it.|
Dear raul: if one has built a turntable than which none grea ... Banquo363
Funny thing that as soon as a new component - which none her ... Dertonarm
Dear dertonarm/syntax: +++++ " however imho speed accu ... Rauliruegas
I am not assuming that the main requests are all there, - in ... Dertonarm
Speed accuracy has inspired two more companies bringing out ... Thuchan
Dear thuchan, the speednic by allnic looks neat. especially ... Dertonarm
From what i can see and read about the speednic......it seem ... Halcro
I downloaded the iphone app and did some testing. the same ... Tonywinsc
It seems like none of us read each other's posts, except rau ... Lewm
Dear lewm, disagree. i think they read the posts but they un ... Thuchan
I found the owners manual online for adjust+ and some review ... Tonywinsc
Bearing lube for dd turntables is yet another controversial ... Lewm
When it comes to bearings/ motors and platters i see a diffe ... Thuchan
Very interesting thread! obviously the question how importa ... Decibell
Tonywinsc, for records with holes out of centre my engineer ... Dover
Dover, good suggestion. i have a small, round bastard that ... Tonywinsc
The allnic speednic works pretty well. i have put two images ... Thuchan
My kab strobe works pretty well also. with it....the raven k ... Halcro
Halcro put it in the most precisely manner. the timeline may ... Dertonarm
I filed the hole in my stereo test record. i improved the r ... Tonywinsc
Dear halcro, you´re right the timeline is perfect. the allin ... Thuchan
Dear thuchan, i don't use the timeline as a record weight as ... Halcro
Purchased a Timeline last year after my Clearaudio strobe stopped working. The cost to replace the Clearaudio strobe was close to the price of a new Timeline.
Having used the CA since I bought my Verdier back in 2006, I found it easy to use and was able to set and forget about the speed. Enjoyed the music immensely on my table.
Since using the Timeline my perspective has changed.
At first I could not believe that the speed of my table was not accurate or stable at 33 1/3 rpm and the fact that it drifted all on it's own.
Then play some music and watch the Verdier slow down as the Timeline easily demonstrates. I use green painters tape, two pieces against the wall about 6 inches apart.
Quite frustrating. Did I worry about such a thing when I had the CA, clearly not. But now that I know that the speed is off, am always conscious of it. Obsessive no, but aware of it all the time. Do I enjoy music less on the Verdier, of course not but.
Have taken on the task to make a battery powered unit with a charging system like the "Callas unit" and will rewire the motor for the Verdier instead of using AC.
Hope that this will solve my speed issue on the Verdier.
My direct drive tables do not have this speed drift issue at all. Great video Halcro.
I think that Halcro nailed it in his post above.
"If you want to be happy.....use a strobe.
If you want the truth.....use the Timeline :^)"
My two cents, take care.
Rugyboogie (System | Threads | Answers | This Thread)
Accuracy or sensitivity of speed monitor device should be pr ... Lewm
Tonywinsc, you have used the term "runout" several ... Pryso
Dear lewm, the allnic speednic is battery powered and not so ... Thuchan
Rugyboogie, i meant with one belt drive tt, sorry! best @ f ... Thuchan
Runout is the measurement of the eccentric motion in a rotat ... Tonywinsc
My mistake, thuchan. so therefore the allnic and the timekee ... Lewm
Thanks rugyboogie, the video was very amateurish but i think ... Halcro
Dear halcro, 'but the way many are discussing ...strobes (ve ... Nandric
Halcro, i think you're on the wrong track ... simple physics ... Decibell
You're right of course decibell. the 'correction' to any sty ... Halcro
Your timeline device is averaging speed. it is not giving y ... Tonywinsc
If you take a look at one of the old brochures for the denon ... Lewm
Dear lewm: yes, they did indeed. these are exerpts from a so ... Rauliruegas
Dear rauliruegas, this is very interesting! does this docume ... Decibell
My friend raul. thanks, got it! or as was once suggested, ... Pryso
Dear decibell: please email me. regards and enjoy the music ... Rauliruegas
Dear pryso, *now wasn't that non-engineer harry belafonte st ... Dertonarm
Dear peterayer, do understand. sometimes threads are dissape ... Thuchan
Hi there-------------------------------testing only. Rauliruegas
Raul try testing the timeline it goes like this - ... Dover
dover, that was funny. :-d the thread " ttweights ... Hiho
I have just fitted a thread drive to replace the rubber belt ... Halcro
I'm sure because ttweights places many ads here on agon they ... Sksos1
I have just replaced the rubber belt on my raven ac-2 with t ... Halcro
Halcro, interesting and thanks for sharing. what's very inte ... Dev
Dear henry, what about listening? when you set the table up ... Lewm
Dear halcro, your new experience with a thread driven raven ... Solong