AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Analog > 1294870073  Start New Thread | Log In | Bookmark This
  A Copernican View of the Turntable System
Once again this site rejects my long posting so I need to post it via this link to my 'Systems' page
HERE
Halcro  (System | Reviews | Threads | Answers | This Thread)

01-12-11
  Responses (401-450 of 994)
Click title to read one, or click date to read all below it.

04-09-11   Dear lew, our respected member mackris stated in some thread ...   Nandric

04-09-11   Dear nandric, i have met thom mackris a few times, and we ex ...   Lewm

04-11-11   Dear ct0517, still looking for my long screws, will come up ...   Thuchan

04-11-11   Thuchan you should find the screws here: http://www.spaenaur ...   Corby

04-11-11   Dear thuchan – thnx so much for the tube book reference. i h ...   Ct0517

04-15-11: Thuchan
Dear Chris,

I was finishing the last meters on my loudspeaker project, now having exactley calibrated the attenuators and all fixed in a special box. This was the time to close the rear front cover. All done now!

Next I went into the Technics SP 10 MK II experiment in a nice but not Panzerholz or slate based wooden plinth. It is a good sounding machine, nevertheless not exactely reaching my demands. Maybe I am a bit spoiled too and it is different with a MK III in a plinth of Albert or Dobbins. But the prices for a good combo are getting insane regarding how much this Pro-series went in earlier times.

I am glad that you like tubes, there are also nice ones from the US :-)

Dear Corb, -thanks for the hint.

Best & Fun Only - Thuchan

Thuchan  (Threads | Answers | This Thread)


04-15-11   Dear thuchan for me personally it did not meet my needs ei ...   Ct0517

04-16-11   Symposium jr initial impressions under armpod okay – i agr ...   Ct0517

04-16-11   Whow so cool.   Ebm

04-17-11   Well chris......what can i say? this sounds almost contradic ...   Halcro

04-17-11   I believe henry your first post is still very relevant – i a ...   Ct0517

04-17-11   I wish i had dertonarm's uni-protractor - setting up a pivot ...   Ct0517

04-17-11   Henry i just emailed you and some of the others here a short ...   Ct0517

04-19-11   Dear chris, thanks for the video in the first place. i was v ...   Nandric

04-19-11   Dear nandric - hard to believe isn't it. your right it does ...   Ct0517

04-19-11   Chris, imo, as long as the jr's come to rest at the same exa ...   Lewm

04-20-11   Dear chris, thanks for the impressive images and the short m ...   Thuchan

04-20-11   Dear lew - i have confirmed what geoch said in an earlier po ...   Ct0517

04-20-11   http://www.youtube.com/watch?v=hszszxnn1mg   Ct0517

08-02-11   After around 7 months of annoyance and concern, i finally ma ...   Banquo363

08-02-11   Nice work banquo, an audio copernican's best friend is a goo ...   Halcro

08-03-11   Banquo363& halcro, i noticed that cover on the underside of ...   Nandric

08-03-11   Banquo i found those at 616 footers give you a lot of flexi ...   Ct0517

08-03-11   Nandric, these 'footers' are of course different to my solut ...   Halcro

08-03-11   Banquo, good to know that you finally found peace with bill ...   Lewm

08-03-11   Hi henry - all i do with the sp10 is put a record on it - us ...   Ct0517

08-03-11   Dear chris, this hobby is not only irrational but it also ma ...   Nandric

08-03-11   To all of you plinth-less persons, it is possible and permis ...   Lewm

08-03-11   Nandric: what lewm said. lewm: as you can see from my syste ...   Banquo363

08-03-11   Lewm: i haven't done any extensive comparative tests between ...   Banquo363

08-03-11   Dear nandric, my dd/tt is a victor tt-81 made for jvc ( and ...   Halcro

08-03-11   Noticed this thread when it started but didn't give it a rea ...   Ecir38

08-04-11   Halcro, for clarification for those who may not know the his ...   T_bone

08-04-11   Thanks for that t_bone. perhaps you can explain how victor w ...   Halcro

08-04-11   The real story here – and i say this from my direct experien ...   Ct0517

08-04-11   Dear banquo, your remark directed to halcro speaks honestly ...   Lewm

08-04-11   Dear chris, this is exactly what my thoughts and intentions ...   Nandric

08-04-11   Lew, i agree with you that idlers need a plinth thats why i ...   Ecir38

08-04-11   Nikola - if i was in your position with a tuned up virgin sp ...   Ct0517

08-04-11   Chris, nandric and brad are quite correct in this thread bei ...   Halcro

08-04-11   Hi brad - yes the idlers need the plinth to damp the rumble ...   Ct0517

08-04-11   Dear nicola and chris, i have found that a tin of asparagus ...   Halcro

08-05-11   Halcro, just because you asked... ...there is a back story. ...   T_bone

08-05-11   Dear chris, as i wrote i was not sure about the 'under cover ...   Nandric

08-05-11   Dear t_bone, because there already is a 'professor' in our m ...   Halcro

08-05-11   Yes nicola.......asparagus....the vegetables. as in asparag ...   Halcro

08-05-11   Henry - i agree a universal one will be tough to do with all ...   Ct0517

08-05-11   Hi guys, it's been a few months. lot's has changed. i have i ...   Corby

08-05-11   Dear halcro, i desagree. our t_bone is entitled to the statu ...   Nandric

08-05-11   Dear nandric, just to set the record straight, the boston au ...   Lewm


< Prev << 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 >> Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password