Click title to read one, or click date to read all below it.
06-30-08
this discussion has turned out to be a very productive one. ... Stiltskin
07-01-08
This is an excellent thread. it is a good chance to exchange ... Joe55ag
07-01-08
Hi smoffatt, for an sme or a schroeder (reference and dps), ... Thom_mackris
07-01-08
Typo - i meant to type 206.5 on the table\arm that needed 21 ... Joe55ag
07-01-08
Tom - i'm probably gonna display my ignorance here so kindly ... Jtimothya
07-01-08
Hi tim, i may have to check out of this thread for a few da ... Thom_mackris
07-01-08
Hi joe55ag, basically, you stepped back analyzed the proble ... Thom_mackris
07-01-08
Oh yes ... a quick follow-up to joe. yes indeed, someone co ... Thom_mackris
07-01-08
Smoffatt - the best way to get a cart aligned in an sme v, i ... Jtimothya
07-01-08
Tim, "the fine gradient movement of the sme's sled make ... Mjglo
07-01-08
Hi mjglo, your question is indeed a valid one. every effec ... Thom_mackris
07-01-08
So, if one wants a custom-made arc protractor, shouldn't one ... Lewm
07-01-08
Consider this, the gauge that comes with the sme arm is driv ... Mjglo
07-01-08
"so, maybe the 233.15mm spindle to pivot recommended by ... Mjglo
07-01-08
my admittedly limited and possibly flawed understanding is ... Jtimothya
07-01-08
Tim, proper setup is probably what sounds good on the sme an ... Mjglo
07-02-08
Hi all, this had been one of the better post i have seen in ... Smoffatt
07-03-08
This post to date is approaching 2,200 views, someones readi ... Stiltskin
07-03-08
I am using wallytracktor universal and it delivers the resul ... Stltrains
07-03-08
Excuse me if this is redundant. what about those of us that ... 04rdking
07-03-08
Hi 04rdking, looking at the specs for the 309 on sme's webs ... Thom_mackris
07-03-08
The ken willis protractor has provisions for all three geome ... Narrod
07-03-08
Thom, the series iii is a totally different critter than the ... 04rdking
07-03-08
Ah ... you're talking about the vintage, 3009 then? the sam ... Thom_mackris
07-03-08
Ok, i see i had the wrong number (233.15) as the pivot to sp ... Mjglo
07-04-08
I contacted ken willis on my arm and he told me if it was an ... 04rdking
07-04-08
Here's the email i got from ken..... for all the other sme o ... 04rdking
07-04-08
04 rdking, for the reasons stated by ken is why i measured m ... Mjglo
07-05-08
Using the graham b-44 factory alignment jigs to position the ... Stiltskin
07-06-08
Stiltskin, let us know your impressions on the mint lp after ... Smoffatt
07-06-08
Smoffatt, will do. i think with being caught up with the ex ... Stiltskin
07-09-08
I haven't yet ordered the protractor yet. i'm just not conv ... Narrod
07-09-08
In my previous post i'm referring to the mintlp record clean ... Narrod
07-09-08: Thomasheisig
The Feickert is a useful tool, DaVinci Audio delivers this Protractor with its Grandezza Arms.
But there is something REALLY interesting available from him, an Adjustment Record, it is called Adjust Plus.
Put the record on the turntable, start it and with the Adjust Plus Software (packed with the record) you can connect it to a Laptop to check all kind of Settings.
Azimuth, VTA etc. while playing! That is something amazing. It was developed with a Software Specialist.
For the discriminated Audiophile a must.
Thomasheisig (Reviews | Threads | Answers | This Thread)
07-09-08
Hi thomas, i remembered early on in this thread someone made ... Stiltskin
07-11-08
I acquired a freickert protractor a little while back. i wis ... Sunnyboy1956
07-11-08
Just to add my voice regarding the virtues of the mint lp. h ... Phaser
07-17-08
For some unknown reason as of yet, my mintlp protractor was ... Stiltskin
07-18-08
mark, fyi, i haven't gotten mine yet either. but then, i ... Islandmandan
07-18-08
Help...am totally confused.initially aligned the cartridge w ... Sunnyboy1956
07-18-08
Stiltskin, that would be hilarious if it weren't so sad! i ... Dan_ed
07-18-08
Sunnyboy, on my arm the difference in overhang between baer ... Dre_j
07-18-08
Dre, patience....that's the missing ingredient. i'm screwed ... Narrod
07-18-08
dan ed, of course i was sent a tracking number. i have si ... Islandmandan
07-18-08
Yeah, i remember something like that as well coming out of n ... Dan_ed
07-18-08
Dan ed, i just arrived home and my dear wife handed me our ... Stiltskin
07-19-08
hi mark, and all, just thought i'd let you know the min ... Islandmandan
07-19-08
My mintlp best tractor also arrived today. took about 45 min ... Tvad
07-19-08
just did my set-up with the mintlp tractor. i must say, th ... Islandmandan
07-20-08
Dre i, welcome and thank you for joining in. i'm fully exp ... Stiltskin
|
|
