Click title to read one, or click date to read all below it.
07-20-08
you have to be a little bit careful if you're using the vpi ... Viper_z
07-20-08: Mjglo
Viper,
That is exactly what I found with my Aries 3 and 10.5i arm. The 262 number was bogus, I did my own measuring before I ordered a protractor from Ken Willis. So those with a VPI 10.5i arm should not order a protractor based on the 262mm distance.
Mike
Mjglo (Threads | Answers | This Thread)
07-20-08
I read these series of posts through, and just can't underst ... Stringreen
07-20-08
stringreen, i'm not agonizing in the least. i'm enjoying a ... Islandmandan
07-21-08
Stringreen, i'm certainly not agonizing over anything... i ... Stiltskin
07-21-08
Stiltskin, i have a aries-3 with 10.5i arm, so my table is t ... Viper_z
07-21-08
Miglo and viper, next time your speaking with vpi, suggest ... Stiltskin
07-21-08
Stiltskin, i installed an sme arm on the aries 3 to close t ... Mjglo
07-21-08
Mjglo, how did you install new arm on your aries-3 if it has ... Viper_z
07-21-08
Viper, you can get a blank armboard to cut your own or one ... Mjglo
07-22-08
All, don't worry about published pivot to spindle distances ... Thom_mackris
07-26-08
For any one's interest regarding the customs entry rejection ... Stiltskin
07-28-08
i agree with stringreen that the vpi jig should be adequa ... Sonofjim
07-28-08
How does the mintlp compare to the wallytools? i have acces ... Headsnappin
07-29-08
to sonofjim, yes, the mintlp is made of glass.the only th ... Islandmandan
07-29-08
Headsnappin, go back and read the posts by palasr on the f ... Dan_ed
07-29-08
I'm in the process of orderring a best tractor from mintlp f ... Sonofjim
07-30-08
as a side note, my measured pivot to spindle distance for ... Sonofjim
07-30-08
I have a dennesen electrostatic protractor that i bought in ... J_barry
07-31-08
My mintlp arc protractor arrived acouple of days ago.... wi ... Stiltskin
08-02-08
Today i finally got around to using the mintlp protractor. ... Stiltskin
08-02-08
mark, i'm glad to see you achieved similar results to what ... Islandmandan
08-02-08
After all this good press (and the nice photos of dan_ed's s ... Dougdeacon
08-03-08
congratulations. do you hear a difference? fwiw - for h ... Jtimothya
08-03-08
i have one of yip's mint protractors coming as well in th ... Downunder
08-03-08
Tim initially when i first posted the question about the fei ... Stiltskin
08-03-08
sonofjim, the 256mm that you saw on vpi website is the corr ... Viper_z
08-03-08
it must be nice to be able to actually go "hands on&qu ... Sirspeedy
08-03-08
You guys really did it. i can't stand it any longer, and ha ... Stringreen
08-03-08
Stringreen and anyone else that are interested. using the m ... Stiltskin
08-03-08
If any of you who are about to order the mintlp would be wil ... Tvad
08-03-08
Stiltskin et al,i did use both the wally,and the graham phan ... Sirspeedy
08-03-08
Very interesting thread. i just emailed to order a mintlp to ... Jfd01
08-03-08
Sirspeedy i agree, the phantom alignment jig is ingenious. ... Stiltskin
08-03-08
hey! much appreciated! thanks. Tvad
08-03-08
Btw,where the wally was "outstanding" was in the w ... Sirspeedy
08-04-08
Tvad, order for two 10x loupes is done. please contact me by ... Jfd01
08-04-08
If you want to borrow my loupe after i use it and pay the sh ... Stringreen
08-04-08
Manufacturers comment: hi @all, well, i was invited by one ... Feickert
08-04-08
Stringreen, what value did you give yip for pivot to spin ... Sonofjim
08-04-08
I wonder if any of you out there with a galibier/tri-planar ... Jfd01
08-04-08
256mm is the right number for ps. you simply can't get any ... Viper_z
08-04-08
i did call vpi and talked to mike who confirmed the 15 mm ... Sonofjim
08-04-08
Thanks for your concern sonofjim... actually, he gave me th ... Stringreen
08-04-08
I have actually called mike too. he told me that i can use o ... Viper_z
08-16-08
Downunder, stringreen and dougdeacon, you guys get a chance ... Stiltskin
08-16-08
Our mint-tractor is on the way, should arrive this week. n ... Dougdeacon
08-16-08
A $15.00 increase in three years, it's still a bargain. dou ... Stiltskin
08-16-08
Doug,it's hard for me to believe "you" of all peop ... Sirspeedy
08-18-08
I traded in the freickert for a shunyata power chord in sing ... Sunnyboy1956
08-18-08
Sunny, interesting note regarding the stock rega cardboard ... Palasr
08-19-08
Palasr my experience with the protractors i downloaded from ... Sunnyboy1956
08-19-08
yes, i received my mint lp protractor late last week. ... Downunder
08-19-08
what else does it need to do? ;-) Dan_ed
08-19-08
what else does it need to do? ;-) smart arse :-) ... Downunder
08-19-08
I just got an e-mail from singapore that my mint protractor ... Stringreen
08-19-08
Lol. g'day, my friend. Dan_ed
08-19-08
Downunder,i just received my new phantom series ii,and there ... Sirspeedy
08-19-08
Forgot to mention,for those wanting a nice assortment of mag ... Sirspeedy
08-19-08
Btw, downunder. i think you mis-interpreted what sunnyboy po ... Dan_ed
08-19-08
Downunder, nice comparison of the mint and the wally. i w ... Palasr
08-19-08
Sirspeedy, let us know how you do with the complete set up o ... Smoffatt
08-19-08
speedy that is interesting re the graham. does it stil ... Downunder
08-19-08
Smoffatt,thanks for the concern....as you know i have been & ... Sirspeedy
08-19-08
Good job on the comparo shane - thanks for the writeup. p ... Jtimothya
08-20-08
Is wam engineering (wally tools) still in business? for th ... Salsumma
08-20-08
So graham engineering refined the phantom and the target pla ... Stiltskin
08-23-08
Since i received my mintlp last week, i'll add my 2 cents to ... Jfd01
08-23-08
Jfd01 and others, if you have not all ready come across this ... Stiltskin
08-23-08
To anyone still interested,and an answer to the "downun ... Sirspeedy
08-23-08
Sirspeedy, i have had many of my arc gears modified by gnsc ... Smoffatt
08-23-08
Smoffatt,i don't think i know about the specified lengths.i ... Sirspeedy
10-31-10
My experience with the mint lp protractor was wonderful. the ... Akimo
10-31-10
Akimo, since you revive this thread let me give my opinion o ... Audioblazer
10-31-10
Continuation ..... however i realized that the mintlp glass ... Audioblazer
|
|
