AudiogoN Forums: Help VPI SDS Issue

Help VPI SDS Issue

I took the plunge and got the SDS. Wow what a difference but I am having an issue. (I am using the 600 rpm motor) In order to get the motor to spin the platter I have to push it to start it moving. The motor is on but it sound like to is hesistating. I unplugged the SDS and no issue it starts right away. Is this an issue with the 600 vs 300 motor?

Autodexr (System | Threads | Answers | This Thread)

03-28-08

Responses (1-24 of 24)

Click title to read one, or click date to read all below it.

03-28-08 This is not a problem with the motor. just give the platter ... Rushton

03-29-08 I tried to go the re-talc the belt route and still the same ... Autodexr

03-29-08 You can find out by simply bypassing the sds and again plugg ... Rushton

03-29-08 What output voltage did you set it to. if you set it too low ... Sidssp

03-29-08 I have it set on for example 33 1/3 rpm i have it set a 72/6 ... Autodexr

03-29-08 I think this is definatly a torque issue as a little nudge g ... Autodexr

03-29-08: Rothmanbrad
The motor is fine, it needs a push just like when you start at 45rpm sometimes. but you ruined your belt by putting powder on it.
Rothmanbrad (Threads | Answers | This Thread)

03-29-08 Try increase the voltage reading on the sds. this is the ou ... Levisaudiovideo

03-29-08 If you call vpi, they will send you a capacitor to modify yo ... French_fries

03-29-08 I had the same problem. there isn't much you can do for the ... Pmotz

03-29-08 Thanks for the advice Autodexr

02-18-09 I had this exact problem after i upgraded my tnt to a superp ... Flyfish2002

02-18-09 Hello, have you gone into calibration mode on the sds and ... Tfkaudio

02-18-09 Tfkaudio- if i'm not mistaken, the only voltage adjustment ... Johnbrown

02-18-09 Same thing when we added the sds to my friends clearaudio ch ... Ehaller

02-18-09 Johnbrown, yes, you are correct. i hadn't dealt with thos ... Tfkaudio

02-18-09 I keep my motor on all the time (upgraded motor w.flywheel, ... Cerrot

02-18-09 Interesting question tfkaudio- i've always just left the mo ... Johnbrown

02-18-09 Hmm, this sort of sounds odd, that vpi's own table isn't com ... Markd51

03-07-12 How do you change the voltage on the sds? Drpat

03-08-12 Call vpi Stringreen

03-11-12 Even easier. click this and there is a downloadable manual ... Wntrmute2

03-11-12 Hello drpat. as wntrmute stated, the calibration manual is a ... Markd51

03-12-12 Thanks for all the advice. got the downloads and will be ad ... Drpat