Click title to read one, or click date to read all below it.
09-04-09
Dear dean_man: in general almost all audio reviews are out o ... Rauliruegas
09-05-09
Raul and others, what tonearms and headshells are you using ... Lewm
09-05-09
Lewm..i use only tangent arm with the p-76..the old rabco sl ... Lharasim
09-05-09
Lew, in my case it's a trans-fi linear air arm. i wonder if ... Dgarretson
09-05-09
Dear pryso: +++++ " but i've come to realize none of t ... Rauliruegas
09-05-09
Dear frogman: +++++ " hp of tas has always been a fan o ... Rauliruegas
09-05-09
Regarding the grado sonata low output...i had one and replac ... Stringreen
09-05-09
Dear raul: "but if a type of electronics ( ss or tube ... Frogman
09-05-09
Dear jb0194: i don't own or owned that pickering cartridge b ... Rauliruegas
09-05-09
Dear toufu: you already has at least the answer of timetel r ... Rauliruegas
09-05-09
This morning i for the first time added 100k loading to modd ... Dgarretson
09-05-09
Dear lewm: i'm using a humble unipivot grace g-940 with own ... Rauliruegas
09-05-09
Dear stringreen: well that 3k lomc is a good cartridge. i do ... Rauliruegas
09-05-09
I replaced the stock 47k resistor with a pair of cheap radio ... Toufu
09-05-09
Raul: i also own a pickering xsv-4000, stanton 881 mkii-s, n ... Jb0194
09-06-09
Dear dgarretson: well, it seems to me that now we have an as ... Rauliruegas
09-06-09
Dear toufu: good that you already try/change it and imho you ... Rauliruegas
09-07-09
Hi all, raul says:+++ things are that axelwahl is running hi ... Axelwahl
09-07-09
Axel, if you are ever of a mind to tamper with ml phono boar ... Dgarretson
09-07-09
Dear friends: this one is a good chance for the at20ss ( i t ... Rauliruegas
09-08-09
Thanks dgarretson, i will look into it when i have some zen. ... Axelwahl
09-08-09
Hi, i just now put back my empire s1000ze/x after a short so ... Axelwahl
09-08-09
I've read through most of this thread with a lot of interest ... Ptmconsulting
09-08-09
(my first post here!) i too have gotten a lot of pleasure re ... Funflyer
09-08-09
Dear funflyer: welcome aboard, agon is an audiofest. like y ... Rauliruegas
09-09-09
Dear axelwahl: i agree with you on those fabulous characteri ... Rauliruegas
09-09-09
Raul, +++ axel, i urge to change your load impedance to 100k ... Axelwahl
09-09-09
Hello all. i'm now listening to my new p-76 on my p-mount li ... Gilbodavid
09-09-09
Dear axel: i concur with dgarretson, those tx2575 ( vishay. ... Rauliruegas
09-09-09
Sorry, not using a sut! Gilbodavid
09-09-09
Or @$10 you can purchase tx2575 directly from manufacturer t ... Dgarretson
09-09-09
Dear ptmconsulting: the internal resistance ina homc is rela ... Rauliruegas
09-10-09
Thanks raul. i posted a question to jim hagerman to seek his ... Ptmconsulting
09-10-09
Hi all, someone on this thread mentioned having tried glanz ... Dgob
09-10-09
I apologize if this info may be somewhere above, but does an ... Dgarretson
09-10-09
Dear dgarretson: here it is, frequency response: 10hz-20k +, ... Rauliruegas
09-10-09
I heard back from jim hagerman. his thughts are that 100k lo ... Ptmconsulting
09-11-09
Here is link to spec picture http://www.flickr.com/photos/77 ... Siniy123
09-11-09
Dgob, here is glanz infromatio from vinyl engine http://down ... Siniy123
09-11-09
Dear ptmconsulting: yes, it works at 100k. i can't say about ... Rauliruegas
09-11-09
After several hours comparing nos astatic mf-100 to nos anda ... Dgarretson
09-11-09
I must add after a few more hrs of development that mf-100 h ... Dgarretson
09-11-09
Hi dgarretson, i am going to have to disagree on the mf100 v ... Lharasim
09-12-09
Hi lharasim, perhaps the higher compliance of mf-100 is good ... Dgarretson
09-12-09
Hi dgarretson,from your description of the mf-100 and p-76 i ... Travbrow
09-12-09
Dgarretson i use a mechanical tangent arm rabco sl-8e i have ... Lharasim
09-12-09
Dear dg/lh: we all know the importance and the difference th ... Rauliruegas
09-12-09
Based on above comments, after breaking in mf-100 i will rem ... Dgarretson
09-12-09
Dgarretson, to each his own we can agree to disagree :) i a ... Lharasim
09-12-09
Dear dave: i run the p-76 even/level like you but on the mf- ... Rauliruegas
|
|
