AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Analog > 1135968909  Start New Thread | Log In | Bookmark This
  Teres, Galibier and Redpoint
After a lot of research deciding whether I should upgrade the motor on my Avid Volvare or my cartridge I have now decided that upgrading my transport is the way to go. I don't have to worry about motor compatability problems and I can always upgrade my cartridge at a later date. Being that I nearly always prefer pursueing the small company, and that the unsuspended route seems right, the three shops above have really caught my interest.

The Teres 320 or 340, Galibier Gavia and Redpoint Model A all cost about the same. But the same problem arises, I don't have an opportunity to hear and compare them and unless it's on my system, it doesn't really matter. I in no way mean to insult Chris, Thom or Peter, but what seperates these three tables in term of sonics? I say this only because they are contributors to this forum. Anyone have any opinions?

My arm is a Tri-Planar VII. Phonostage a Thor. Art Audio SET amps. Systrum rack. Thanks for your input. Richard
Richardmr  (System | Threads | Answers | This Thread)

12-30-05
  Responses (1-50 of 158)
Click title to read one, or click date to read all below it.

12-30-05   I am completely sympathetic! i, too, am looking into my nex ...   Dan_ed

12-30-05   Dan ed- do you know why redpoint does not couple the arm and ...   Richardmr

12-30-05   Hi; i am in the same boat as well. i have heard all of these ...   Santanaali

12-30-05   You really should also consider the verdier platine at this ...   Bigbucks5

12-30-05   Guys sorry to be no help, but i have questions for both of y ...   Meby

12-30-05   Meby - as far as my avid is concerned, i really have nothing ...   Richardmr

12-30-05   This is a great thread! i recently heard the galibier turnt ...   Albertporter

12-30-05   Yes, please take my comments and observations as nothing mor ...   Dan_ed

12-30-05   Hi albert, yes, i think all three use the maxon dc motor. ...   Dan_ed

12-30-05   Guys - this is great! all three tables use a dc motor. whi ...   Richardmr

12-30-05   I have an earlier version of the redpoint testa rosa which i ...   Dmailer

12-30-05   Dmailer, what arm and cartridge are you using on the gali ...   Meby

12-31-05   Dear richard, i am a fan of smaller companies as well and i ...   Peepoy2

12-31-05   I am using a schroeder reference with a zyx universe cartrdi ...   Dmailer

12-31-05   Btw, regarding the moveable armpod, i cannot really say if a ...   Dmailer

12-31-05   Dear richard: good that you already decided to buy a new tt. ...   Rauliruegas

12-31-05   Dmailer, thanks for clearing up the armpod alignment. the i ...   Dan_ed

12-31-05   I think raul should buy one of each and set up a salon! then ...   Dougdeacon

12-31-05   Yes, i am using the anvil which seems to work very well. i ...   Dmailer

12-31-05   Very good example, dougdeacon. i have experienced this with ...   Dan_ed

01-01-06   i've never tried a weight either, for exactly this reason. ...   Dougdeacon

01-01-06   I don't think you ought to write off your avid table just ye ...   Greenman

01-11-06   Now that ces is over, i would like to keep the above questio ...   Richardmr

01-11-06   Yes, i was hoping that someone who went could offer a review ...   Dan_ed

01-11-06   Teres has never shown at ces before. don't know about galibi ...   Dougdeacon

01-11-06   Here's another possible source for your platter ring, that w ...   Colitas

01-11-06   Hi dougdeacon, thom had mentioned something about ces so i ...   Dan_ed

01-11-06   Another small upgrade to the teres tables is that the motor ...   Am_dial

01-11-06   Redpoint at ces doug - do you have a source for the 2mil ...   Jtimothya

01-11-06   Doug, the new belt was just part of our on-going work quest ...   Teres

01-11-06   Doug - thanks for the info on the belt. it's amazing that i ...   Richardmr

01-12-06   Chris, thanks for the reality check. i quite agree with you ...   Dougdeacon

01-18-06   Hello all, i've been down for the count with a post-ces flu ...   Thom_mackris

02-04-06   Thanks for the informative posts, thom and chris. i've spen ...   Dan_ed

02-04-06   Dan_ed, tension with a mylar belt is certainly touchier tha ...   Dougdeacon

02-05-06   Dan ed - no, i have not made a decision yet and i'm probably ...   Richardmr

02-05-06   Thank's dougdeacon. i will probably build a stand for which ...   Dan_ed

02-05-06   Hi richardmr, i know all to well how that side of the bed th ...   Dan_ed

02-05-06   Dan_ed, we haven't received the new bearing yet, so my tabl ...   Dougdeacon

02-05-06   I thought i'd jump in and say thanks to everyone here on the ...   Indigorose

02-05-06   I used a technics sp-25 as a motor to drive a vpi tnt jr. pl ...   Nghiep

02-05-06   The motor pod on my redpoint/galbier does not move during no ...   Dmailer

02-05-06   Colin, we captured another one. great! which model teres a ...   Dougdeacon

02-05-06   Congratulations, colin! i'm very gealous right now! :) dma ...   Dan_ed

02-06-06: Dmailer
My motor pod does not have footers. I believe there are threaded holes that would allow you to attach a spike or footer if you choose.
Dmailer  (Threads | Answers | This Thread)


02-08-06   I ended up ordering a teres 350 with a schroeder reference a ...   Indigorose

02-09-06   Hi all, a couple of quick comments ... firstly (to dan-ed) ...   Thom_mackris

02-10-06   fwiw, i once tried adding a thin (.5mm) layer of a self-adhe ...   Dougdeacon

02-17-06   Colin, good for you!!! i am now starting to get the itch t ...   Rwd

02-19-06   I am curious concerning this question of prat and mass-loade ...   Dan_ed


    1 | 2 | 3 Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password