AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Speakers > 1211428524  Start New Thread | Log In | Bookmark This
  Capacitor log Mundorf Silver in Oil
I wished I could find a log with information on caps. I have found many saying tremendous improvement etc. but not a detailed account of what the changes have been. I have had the same speakers for many years so am very familiar with them. (25+ years) The speakers are a set of Klipsch Lascala's. They have Alnico magnets in the mids and ceramic woofers and tweeters. The front end is Linn LP12 and Linn pre amp and amp. The speaker wire is 12 gauge and new wire.

I LOVE these speakers around 1 year ago they started to sound like garbage. As many have said they are VERY sensitive to the components before them. They are also showing what I think is the effect of worn out caps.

There are many out here on these boards I know of that are using the Klipsch (heritage) with cheaper Japanese electronics because the speakers are cheap! (for what they can do) One thing I would recommend is give these speakers the best quality musical sources you can afford. There is a LOT to get out of these speakers. My other speakers are Linn speakers at around 4k new with Linn tri-wire (I think about 1k for that) and the Klipsch DESTROY them in my mind. If you like "live feel" there is nothing like them. In fact it shocks me how little speakers have improved in 30 years (or 60 years in the Khorns instance)

In fact I question Linn's theory (that they have proved many times) that the source is the most important in the Hi-Fi chain. Linn's theory is top notch source with lessor rest of gear including speakers trumps expensive speakers with lessor source. I think is right if all things are equal but Klipsch heritage are NOT equal! They make a sound and feel that most either LOVE or hate. (I am in the LOVE camp and other speakers are boring to me)

So here goes and I hope this helps guys looking at caps in the future. Keep in mind Klipsch (heritage Khorns Belle's and Lascala's especially) are likely to show the effects of crossover changes more then most.

1 The caps are 30 years old and
2 the speakers being horn driven make changes 10x times more apparent.

Someone once told me find speakers and components you like THEN start to tweak if needed. Don't tweak something you not in love with. Makes sense to me.

So sound
Record is Let it Be (Beatles)
The voices are hard almost sounds like a worn out stylus.
Treble is very hard. I Me Mine has hard sounding guitars. Symbals sound awful. Everything has a digital vs. analog comparison x50! Paul's voice not as bad as John's and George's. Voices will crack.

different lp
Trumpets sound awful. Tambourine terrible. Bass is not great seems shy (compared to normal) but the bad caps draw soooooo much attention to the broken up mid range and hard highs that are not bright if anything it seems the highs are not working up to snuff. I have went many times to speaker to make sure tweeters are even working.

All in all they sound like crap except these Klipsch have such fantastic dynamics that even when not right they are exciting!

Makes me wonder about the people who do not like them if they are hearing worn out caps and cheap electronics? Then I can see why they do not like them! If I did not know better from 25+ years of ownership that would make sense.

For the new crossover I have chosen Mundorf Silver in Oil from what I have read and can afford. I want a warm not overly detailed sound as Klipsch already has lots of detail and does not need to be "livened up" they need lush smooth sounding caps. Hope I have made the right choice?

When the crossover is in I will do a initial impression on same lp's. Right now it goes from really bad (on what may be worn vinyl) to not as bad but NOT great on great vinyl. (I know the quality of the vinyl because tested on other speakers Linn)

The new caps are Mundorf Silver in Oil and new copper foil inductors are coming. I will at the same time be rewiring the speakers to 12 guage from the lamp cord that PWK put in. PWK was a master at getting very good sound often with crap by today's standards components.

The choice of speakers would be a toss up now depending on what I am listening to. Klipsch vastly more dynamic but if the breaking up of the sound becomes to much to effect enjoyment the Linn would be a better choice on that Lp. If I could I would switch a button back and forth between speakers depending on song and how bad the break-up sound was bothering me.

Volleyguy  (System | Threads | Answers | This Thread)

05-21-08
  Responses (1451-1500 of 1935)
Click title to read one, or click date to read all below it.

06-26-11   Hi reynolds853 was you using the mundorf s/g/o in your silve ...   Michaelvv

06-27-11   Michaelvv, the s/g/o caps were indeed used in the silverlin ...   Reynolds853

06-28-11   Hi reynolds853 the mundorf s/g/o i have used in my hpd-385a ...   Michaelvv

06-29-11   This is a very interesting thread. http://forum.audiogon.co ...   Volleyguy

06-29-11   Hi volleyguy have you tried the vsf as decoupling caps in s ...   Michaelvv

06-29-11   For sure micheal. i have vsf in the fisher. big difference ...   Volleyguy

06-30-11   Hi volleyguy. yesterday i replaced the 2.0 uf caps in my fri ...   Michaelvv

06-30-11   I would not say duelund was not a big upgrade but the most c ...   Volleyguy

07-01-11   Hi volleyguy.- i would like to see a picture of your klipsc ...   Michaelvv

07-03-11   As i know a lot of our clients follow this thread. i wanted ...   Duelund_coherent_audio

07-03-11   Hm, link seems to be broken by audiogon. try this: http://t ...   Duelund_coherent_audio

07-04-11   Switched amps to double check the silver wire after some goo ...   Volleyguy

07-05-11   Hi just finish evaluating the v-cap tftf in my tube pre-amp. ...   Michaelvv

07-05-11   Hmmmm michael. which mundorf did you prefer? i have alway ...   Volleyguy

07-05-11   Before rebuilding your current crossovers, i would look into ...   Utahusker

07-05-11   Utahusker i have stuck to pwk original designs. i have used ...   Volleyguy

07-05-11   Volleyguy the mundorf caps in pre-amps 0.1 uf was great s/o ...   Michaelvv

07-06-11   Micheal does the vcap copper have any of the coolness of the ...   Volleyguy

07-06-11   Just ordered some vcap copper teflons for the phono or pre-a ...   Volleyguy

07-06-11   Volleyguy we have had a listen session here where i live thi ...   Michaelvv

07-07-11   I have to admit every time i put in a duelund part it just g ...   Volleyguy

07-07-11   I think my statement "way way better" was that the ...   Michaelvv

07-07-11   Micheal i live less than 100k from partsconnexion and they ...   Volleyguy

07-07-11   Fwiw, jon l's 'orgy of capacitors' now has a review of the c ...   Jburidan

07-07-11   Volleyguy i have got a pdf kind of confirmation mail from pa ...   Michaelvv

07-07-11   Micheal yes i am canadian and they are based in canada. i th ...   Volleyguy

07-08-11   Volleyguy i do not own a car ha ha ha. but i live about 210 ...   Michaelvv

07-08-11   I spent an hour+ trying to post the pics and save a system b ...   Volleyguy

07-08-11   Volleyguy if you send me the pics to my email , i can put yo ...   Michaelvv

07-09-11   Micheal i have some pics up now.   Volleyguy

07-09-11   Sorry i did not mean to put the pics up as another thread? ...   Volleyguy

07-10-11   I have the vcap installed in the phono stage. can't say anyt ...   Volleyguy

07-10-11   Volleyguy i have seen your pictures and enjoyed them at lot. ...   Michaelvv

07-13-11   Volleyguy , yesterday i have installed v-cap cuft in three p ...   Michaelvv

07-13-11   A few years back i replaced the 3,3 uf mundorf silver/gold i ...   Duomike

07-16-11   Micheal not sure if you have heard of arthur salvatore? he h ...   Volleyguy

07-16-11   Doumike i was expecting the vcaps cuft to be rough at first ...   Volleyguy

07-18-11   We have had a listening session , with a pair of upgraded tu ...   Michaelvv

07-18-11   Volleyguy i think you have mentioned arthur salvatore in one ...   Michaelvv

07-19-11   I am unsure about being the expert but vsf's are fantastic! ...   Volleyguy

07-20-11   Hi volleyguy which inductor should i change , i got new 2.5 ...   Michaelvv

07-20-11   Sorry micheal confused? i would change the woofer inductor ...   Volleyguy

07-21-11   Hi volleyguf , just want to know where is it located the 2.5 ...   Michaelvv

07-21-11   Volleyguy, "teflon seems to charge and discharge with ...   Duelund_coherent_audio

07-21-11: Michaelvv
Duelund

Have your heard the V-Cap CuFT after a valid break-in time , properly 400+ hours.
We are 3 different persons here in Denmark who are doing it right now , not 400+ hours yet.
I would like to use your caps for my tannoy HPD-385a , but at the time i have saved up , your prices are properly raised again. Funny when i asked rabu-acoustics.dk they can not give me an exact price. What is the reason for that ???

Michaelvv  (Answers | This Thread)


07-21-11   You're right about the price michael. since receiving some r ...   K2_nl

07-22-11   Hi kees , thanks for a great update on the caps magic. what ...   Michaelvv

07-22-11   K2 thank you! i have stated many times in this thread that ...   Volleyguy

07-22-11   Michael, " funny when i asked rabu-acoustics.dk they c ...   Duelund_coherent_audio

07-22-11   Duelund's do not mix well with other caps i have found, cros ...   Undertow


< Prev << 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 >> Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password