AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Amps Preamps > 972095586  Start New Thread | Log In | Bookmark This

  Aleph-3 Questions
I just recieved my dream amp.So far so good.It has under 50 hours on it.I was wondering if these have a recommended break in time?It sounds very good but honestly I was expecting better.Also has anyone found any tweaks that improve the performance? Cones etc.Thanks!
David99  (Threads | Answers | This Thread)

10-20-00
  Responses (1-33 of 33)
Click title to read one, or click date to read all below it.

10-20-00   I used to have the aleph 3. i purchased mine used, so it wa ...   Macm

10-21-00   Hi david, not having directly heard this amp, i can't offer ...   Sedond

10-21-00   I purchased my aleph 3 as a demo with very few hours on it. ...   Pkron

10-21-00: John_l
I heard the volksamp version of the aleph 30. It's one of the very best solid state amps I have heard. I recall that when we ran it straight out of the wadia 30, the sound was some of the best I had heard. When we ran it through an Audio Research 12, the sound took on significant degredation. A preamp mismatch may be what you are experiencing. I have read that you need an active preamp with lots of gain to drive the aleph 30. That may be similar to what you are experiencing. Also, I have read that the alephs sound like an ordinary ss amp until they have been on for a whole hour.
John_l  (Threads | Answers | This Thread)


10-21-00   To my ears my new amp sounds very good.my concern is i feel ...   David99

10-21-00   I owned an aleph 5 for several years and would not count sou ...   Drubin

10-21-00   David99: you mean this was your dream amp for 3 years and yo ...   Cornfedboy

10-21-00   I have owned the 3 and now the 2 monoblocks. i have found t ...   Ejlif

10-21-00   I've owned aleph 5s and what i like best about them is that ...   Onhwy61

10-21-00   So what speakers do you have? maybe their topped out. i hope ...   Kacz

10-21-00   Hi guys,thanks for all the advice.my speakers are paradigm s ...   David99

10-22-00   You sound like me. i am very hard on every new piece of gea ...   Pkron

10-22-00   Hello david, as suggested earlier, some of the problem mi ...   Mrtibs

10-22-00   Rogue sez their 99 preamps' output impedence is 100 ohms, bu ...   Sedond

10-22-00   Sedond,i e-maied mark(rogue) and he got right back to me as ...   David99

10-23-00   David, ya mite wanna contact me about a conversation i had w ...   Sedond

10-23-00   Well, i guess what it comes down to is who to have more trus ...   David99

10-23-00   Hello david99, as stated earlier, i haven't heard the rog ...   Mrtibs

10-23-00   David, martin has owned many amps and equipment, and knows o ...   Carl_eber

10-23-00   Carl,i did have that part worked out.i did my home work.i ta ...   David99

10-24-00   I just looked at rogue's website, and couldn't find specs. ...   Carl_eber

10-24-00   A tube preamp with the aleph 3? isn't the point of having an ...   Kacz

10-24-00: Sedond
rogue audio doesn't put the output impedence spec in their 99 preamp manual. at least it wasn't in the manual that came w/*my* 99... which is why i tried crossing the 99's outputs w/differing resistors. as i previously said, a 2.2k-ohm resistor audibly reduced the volume of my rig, when the rogue was hooked up to my 25k-ohm impedence crossover. *no* drop in volume w/the 2.2k-ohm resistor crossing the cary preamp's outputs, which is rated at 800 ohms output impedence. this is why i believe that the rogue 99's output impedence is at least 2k-ohms. i've asked pass labs for input on a 2k-2.4k-ohm preamp driving their aleph-3, & haven't gotten a definitive answer; i'll post it when i receive it.
Sedond  (Threads | Answers | This Thread)


10-25-00   Kacz: my sentiments exactly! the synergy that exists between ...   Subaruguru

10-26-00   Nelson pass sez that the aleph-3's input impedence is 23k-oh ...   Sedond

10-26-00   I have added approx.50 more hours of burn in time using the ...   David99

10-26-00   David, i'm very glad this is turning around for you. maybe ...   Carl_eber

10-26-00   Carl,the new godsmack is coming out halloween!! i will snatc ...   David99

10-31-00   David, have you tried leaving the aleph 30 on all day? i ha ...   John_l

11-11-00   Here is an update.first of all,this amp has taken a long tim ...   David99

11-11-00   David; glad to see that you're liking the aleph 3. i've co ...   Garfish

11-11-00   Craig,i have found the bass to be very true to life.it may n ...   David99

11-12-00: Garfish
Thanks for the response Dave. I agree that "natural" bass is best, ie as opposed to overly prominent bass of some components. My McCormack DNA-2DX does bass very well & with good PR&T too. It runs just hot enough to attract our cat who occasionally sleeps on top of it-- while it is playing-- hope your feet are OK. I'm glad to hear you've successfully tried biwiring, as that's one of the reasons I've stayed away from the Aleph amps. For now, I just acquired a Sonic Frontiers Power 2 (lots of tubes) that I'm enjoying. I don't seem to be able to stay away from big amps (it weighs 110 lbs). So the Aleph will have to wait:-). Cheers. Craig.
Garfish  (System | Reviews | Threads | Answers | This Thread)



  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password