2. amps-preamps
  3. 1290365934

I've got a mcintosh mx110 that's been sitting ...

Sitting for over 1 year. I've finally got a chance toget some mac250 amps .I want to hook the mc250s mono ... To my infinity kappa7s. Thru my mx110 preamp. Do I need to bring my tube pre amp on to variac it up to power or can I plug and go. The mx110 worked great when put on storage. Thanks for any input.
bggers
5 responses Add your response
stanwal's avatar
stanwal
3,147 posts
 
If I had a variac I would use it, better safe than sorry and it can't hurt anything.
Post removed 
minorl
1,014 posts
 
One year sitting won't hurt the capacitors. You should be able to power it on with no problem. However, if you are nervous. Take it to a repair shop and ask them to power it on with a variac.

enjoy
atmasphere's avatar
atmasphere
11,566 posts
 
If this is an original MX 110 and the filter capacitors in the power supply have not been replaced, I would be careful running the preamp- startup on a variac and take and hour to bring it to full voltage- but I would regard its use as very temporary until the caps are replaced.

The power transformer is what is at risk, but certainly in any event the preamp will not sound its best, even if it seems to sound OK.
bggers OP
1 posts
 
It's original z series ...
In use just over 16 months ago...
Sounded greAt then ... I appreciate all input
Thanks brett
Log in to respond
More to discover
80x80
Kinki Studio EX-M7 Amp
80x80
Leak ST-50
80x80
Aurorasound AFE-12 MC Step-Up Transformer