AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Amps Preamps > 1276356977  Start New Thread | Log In | Bookmark This
  Lightspeed Attenuator - Best Preamp Ever?
The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
Pubul57  (System | Threads | Answers | This Thread)

06-12-10
  Responses (951-1000 of 1334)
Click title to read one, or click date to read all below it.

09-26-11: Agear
Not helping anyone at this point Tony. Just curious. Do you have any current or planned business relationship with George? Teajay asked that of Paul above and it is logical to ask the same of you. I know you are now attempting to design and sell tube amps now. Correct?

No LSA users with feedback on its performance with SS amplification?

Agear  (Reviews | Threads | Answers | This Thread)


09-26-11   I've been using the lsa with a spectron musician for the pas ...   Drubin

09-26-11   Teajay asked me that? that's odd - missed it. i use to think ...   Pubul57

09-26-11   Don't mean to suggest with an amp with less than 100kohm inp ...   Pubul57

09-26-11   If teajay asked that of paul i certainly missed it too. not ...   Clio09

09-27-11   I have had my ls now for over 2 years and can thoroughly rec ...   Brownemi

09-27-11   I've been using my lsa with ss monoblocks. in the beginning ...   Batalok

09-27-11   I've owned one for years since i first saw it reviewed in 'a ...   Acuscott

09-27-11   This preamp simply, "isn't there". i just shake m ...   Devilboy

09-27-11   I have been using the lsa for a few months now with coincide ...   Auntjenof2

09-27-11   This preamp simply, "isn't there". ridiculously g ...   Devilboy

09-27-11   Are you guys dealers for lsa? :)   Pubul57

09-27-11   Sorry. i posted twice because the first didn't post right a ...   Devilboy

09-27-11   09-27-11: acuscott "...if you can afford a very epxensi ...   Pubul57

09-27-11   Batalok, how long are your cables now and what brand? just c ...   Grannyring

09-27-11   Glad to here their a few more of us "dealers" out ...   Clio09

09-27-11   Grannyring: i've noticed a great dependence on cable length. ...   Banquo363

09-27-11   I run 1 meter from las to music reference rm10 (hmm, at leas ...   Pubul57

09-27-11   My record for misspellings in a single comment. george, is ...   Pubul57

09-27-11   In the system i have that features the lsa my speaker cables ...   Clio09

09-27-11   The hf filter that capacitance of an interconnect that is 30 ...   Georgelofi

09-27-11   Thank you.   Pubul57

09-27-11   Both the mogami and the soundsilver are well under 100pf/ft. ...   Banquo363

09-28-11   banquo363 the 1.2kohm for the phono is very high and should ...   Georgelofi

09-28-11   Grannyring, my cables are diy. it consists of silver-gold (f ...   Batalok

09-28-11   Am i right in believing that non-ideal impedance match betwe ...   Banquo363

09-28-11   In most cases high end roll off is the symptom. as we age, t ...   Clio09

09-28-11   not necessarily. it depends on how the two impedances vary ...   Almarg

09-28-11   Banquo363am i right in believing that non-ideal impedance ma ...   Georgelofi

09-28-11   If i remember batalok i think you maybe one of many i may ha ...   Georgelofi

09-28-11   I bought a lightspeed about a year back. it works really we ...   Picky

09-29-11   George, that was done sometime ago but the whole thing becam ...   Batalok

09-29-11   George, in the warpspeed diy thread, the poster identified s ...   Pubul57

09-29-11   I read that as well and find #4 interesting. wasn't the whol ...   Clio09

09-29-11   Agree that #1 is completely irrelevant to me in my system an ...   Pubul57

09-29-11   True, i can't see what more can be done to the circuit. i th ...   Clio09

09-29-11   2: never had any problems with the ldr side, as my prototype ...   Georgelofi

10-04-11   I don't know what it is (thanks almarg for the explanation a ...   Banquo363

10-04-11   Brent jesse?   Pubul57

10-04-11   Andy at vintage tube services   Banquo363

10-04-11   Two of the best:)   Pubul57

10-04-11   Banquo363, have you tried the cheater plug on the rm-10? how ...   Clio09

10-04-11   Clio09: with shorting plugs, i had to put my ears to the spe ...   Banquo363

10-04-11   Banquo363, regarding the rm-10, perhaps some dc on your ac l ...   Clio09

10-04-11   Hi guys, as i have found out input switching is almost as de ...   Georgelofi

10-05-11   Very interesting and thanks for posting george. i've grown ...   Clio09

10-05-11   Clio09: what's a jensen plug? i looked up jensen 'iso-max' p ...   Banquo363

10-05-11   There should be only one mains earth point in a system, (if ...   Georgelofi

10-05-11   Here is what you are looking for: http://www.jensen-transf ...   Clio09

10-05-11   Well this thread has resulted in 1000 posts, quite an amazin ...   Clio09


< Prev << 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 >> Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password