Click title to read one, or click date to read all below it.
10-13-10
Ces is huge, think downtown manhattan in rush hour. proper p ... Clio09
10-13-10
atma-sphere and audio note will both be at rmaf with their f ... Tvad
10-13-10
I'll think about it, sounds like fun. now, back to our regul ... Pubul57
10-13-10
The audio note uk room is always well done. they crank up so ... Clio09
10-19-10
"i too will be getting an opportunity to hear the lsa a ... Jdec
10-31-10
I decided to take pubul57's lead. using the lightspeed atte ... Wilsynet
10-31-10
Wilsynet, i'm glad you gave it a try. by the way, clio9 is a ... Pubul57
10-31-10
Wilsynet, glad you were able to put together this combinatio ... Clio09
10-31-10
Apologies in advance for taking this thread slightly off tan ... Tvad
10-31-10
I agree with the assessment, although some tube rolling coul ... Clio09
10-31-10
I would say the rm10 is quite neutral and fast with the lsa, ... Pubul57
11-01-10
I do agree with the review. it's a well balanced amplifier, ... Wilsynet
11-01-10
Wilsynet, i agree with everything you just said, and the mer ... Pubul57
11-01-10
Off to the closet to unpack the rm-10. i light load my rm-1 ... Clio09
11-01-10
Do you think the 12ohm nominal benefits you with light loadi ... Pubul57
11-01-10
Light loading is supposed to make the amp more linear, with ... Clio09
11-01-10
I've light loaded the rm10s and rm9s and prefer the 8 ohm tp ... Pubul57
11-02-10
Just looked at the merlin vms impedance graph (stereophile), ... Georgelofi
11-02-10
That's what it sounded like to me. it seems that light loadi ... Pubul57
11-02-10
The extra power is certainly a consideration in easy to driv ... Clio09
11-02-10
You may find that the otl's are getting loaded down some by ... Georgelofi
11-02-10
sorry forgot the other part of your question, as for the po ... Georgelofi
11-02-10
But there is no output impedance optimization based on dial ... Pubul57
11-02-10
For those interested i posted the light loading question ove ... Clio09
11-02-10
11-02-10: pubul57 but there is no output impedance optimizat ... Georgelofi
12-02-10
I've bought george's lightspeed and am (im)patiently awaitin ... Kevinzoe
12-02-10
Kevin, what preamp will the ls be replacing or compared to? ... Pubul57
12-03-10
Mine was delivered today. transit time was 15 days to usa. g ... Knghifi
12-03-10
Pubul57 - i used to have an audio aero capitole mkii se cdpl ... Kevinzoe
12-03-10
lol...*wink* *wink* Clio09
12-03-10
Kevin, i can't imagine you would not prefer the lsa over the ... Pubul57
12-27-10
Rca ics finally arrived and here's my .02. lsa is a very go ... Knghifi
12-27-10
Knghifi, glad you found the lsa a good listen. there is some ... Pubul57
12-28-10
Knghifi, give it at least a week. it will open up more. Fiddler
12-28-10
Knghifi, question. are you listening to the lsa with new r ... Fiddler
12-28-10
both rca ics are dealer demos and i've logged ~250+ additio ... Knghifi
12-28-10
Pubul57, now it's cold, just cleared 18" of snow and he ... Knghifi
12-28-10
Hi guys and knghifi, glad your enjoying the lightspeed atten ... Georgelofi
12-28-10
My lsa keeps getting better with time (i've had it less than ... Banquo363
12-28-10
Specs for trl? like asking rolls royce for horespower data a ... Pubul57
12-28-10
I believe the trl amps are over 47k ohms, somewhere in the 6 ... Clio09
12-28-10
Paul told me the trl samsons input impedance is 68kohms. ... Knghifi
12-28-10
It would be good for someone to grab an ohm-meter and measur ... Georgelofi
12-28-10
Banquo363 as stated in the instructions, you can leave it po ... Georgelofi
12-28-10
Banquo, your experience mirrors mine. if you look back in ... Fiddler
12-28-10
Since i asked the question in terms of absolutes (best)i rep ... Pubul57
12-28-10
I wish i would check my spelling. of course i meant to say & ... Pubul57
12-29-10
I can't say for sure about the samson, but my trl d-225 whic ... Clio09
12-29-10
George, when i wrote "warm up use time" i meant a ... Banquo363
12-29-10
So if he doesn't like fets or mosfets the input stage to the ... Georgelofi
|
|
