AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Amps Preamps > 1276356977  Start New Thread | Log In | Bookmark This
  Lightspeed Attenuator - Best Preamp Ever?
The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
Pubul57  (System | Threads | Answers | This Thread)

06-12-10
  Responses (451-500 of 1334)
Click title to read one, or click date to read all below it.

01-04-11   Maybe true to the source should be more about the least colo ...   Clio09

01-04-11   Clio09, i see you point. removing one sonic signature will ...   Knghifi

01-04-11   maybe true to the source should be more about the least col ...   Jdec

01-04-11   "if i can eliminate one source of coloration from the m ...   Pubul57

01-04-11   I'm having trouble following this debate between knghifi and ...   Banquo363

01-04-11   Here's my 2c worth, after noticing this thread had recently ...   Tradeontheweb

01-04-11   Banquo, where did you study philosophy?   Pubul57

01-04-11   uc irvine. for more years than i'd like to admit.   Banquo363

01-04-11   Whoa, this is getting deep. i just came back from setting up ...   Clio09

01-04-11   The source and its various meanings as related to the lsa: ...   Pubul57

01-04-11   Deep is right, but i love it! good stuff and we are getting ...   Grannyring

01-05-11   This is the part i like ... "2. the recording and the ...   Tradeontheweb

01-05-11   I quote, or at least paraphase, both the great winston churc ...   Teajay

01-05-11   Twas brillig, and the slithy toves did gyre and gimble in ...   Pubul57

01-05-11   This thread was way more fun before you guys all turned into ...   Fiddler

01-05-11   Well that first one of mine turned into three and the rest w ...   Clio09

01-05-11   I want to chime in. i deal with color in differnt aspects of ...   Marqmike

01-06-11   "that is lost on a lot of sound systems that i have lis ...   Fiddler

01-06-11   is lsa the only component in your system? what if the tota ...   Knghifi

01-06-11   "lsa is not an empty box..." pretty close though.   Pubul57

01-06-11: Knghifi
01-06-11: Pubul57
"LSA is not an empty box..." Pretty close though.

So another passive with less parts count than LSA is superior?

Knghifi  (Threads | Answers | This Thread)


01-06-11   That is overstating the argument, but a good design will hav ...   Pubul57

01-06-11   so another passive with less parts count than lsa is superio ...   Jdec

01-06-11   That is overstating the argument, but a good design will hav ...   Pubul57

01-06-11   Not sure how it got repeated, another example of too many pa ...   Pubul57

01-06-11   Ok, based on the reasoning that less parts and simplicity al ...   Grannyring

01-06-11   I understand why a moving coil cartridge would need gain (an ...   Pubul57

01-06-11   Sources these days, esspecially cd can drive (have enough ou ...   Georgelofi

01-06-11   Pubul57 good questions and they reflect what i am trying to ...   Grannyring

01-06-11   Both publ57 and fiddler argue, i think, that the live perfor ...   Banquo363

01-06-11   History of... then phenomenology - stony brook was very &quo ...   Pubul57

01-07-11   years ago i had a krell fpb300 and fbp600 at the same time. ...   Knghifi

01-07-11   Hello everyone. i hope i did not sound condecending on my la ...   Marqmike

01-07-11   I suppose moving forward we need to get away from what is be ...   Pubul57

01-07-11   Knghifi, i', not familiar with the krell gear, but i assume ...   Pubul57

01-07-11   Made a few grammatical errors, there, but i hope you get the ...   Pubul57

01-08-11   passives don't extract anything. they just pass an attenuat ...   Clio09

01-08-11   just for the record, i built my system around my speakers. ...   Clio09

01-08-11   Clio09 "passives don't extract anything. they just pas ...   Grannyring

01-08-11   Grannyring, i think you are right, there is not an impedance ...   Pubul57

01-08-11   Grannyring, you keep arguing with conventional and accepted ...   Fiddler

01-08-11   yes i agree looking to 100k ohms the lsa would be a good ma ...   Clio09

01-08-11   Like i said, the maximum and complete set of signal informat ...   Pubul57

01-08-11   "but, even if we accept that, it does not mean that any ...   Pubul57

01-10-11   Fiddler, you are for some reason quite short with me in your ...   Grannyring

01-11-11   "fiddler, you are for some reason quite short with me i ...   Fiddler

01-12-11   How to kill a thread "by grannyrig" well this th ...   Georgelofi

01-12-11   George, other than providing a product category that people ...   Pubul57

01-12-11   Yep, no arguments from me there paul. if you have less than ...   Georgelofi

01-12-11   If you need something that can drive long interconnects and ...   Clio09


< Prev << 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 >> Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password