AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Amps Preamps > 1276356977  Start New Thread | Log In | Bookmark This
  Lightspeed Attenuator - Best Preamp Ever?
The question is a bit rhetorical. No preamp is the best ever, and much depends on system context. I am starting this thread beacuase there is a lot of info on this preamp in a Music First Audio Passive...thread, an Slagle AVC Modules...thread and wanted to be sure that information on this amazing product did not get lost in those threads.

I suspect that many folks may give this preamp a try at $450, direct from Australia, so I thought it would be good for current owners and future owners to have a place to describe their experience with this preamp.

It is a passive preamp that uses light LEDs, rather than mechanical contacts, to alter resistance and thereby attenuation of the source signal. It has been extremely hot in the DIY community, since the maker of this preamp provided gernerously provided information on how to make one. The trick is that while there are few parts, getting it done right, the matching of the parts is time consuming and tricky, and to boot, most of use would solder our fingers together if we tried. At $450, don't bother. It is cased in a small chassis that is fully shielded alloy, it gets it's RF sink earth via the interconnects. Vibration doesn't come into it as there is nothing to get vibrated as it's passive, even the active led's are immune as they are gas element, no filaments. The feet I attach are soft silicon/sorbethane compound anyway just in case.

This is not audio jewelry with bling, but solidly made and there is little room (if any) for audionervosa or tweaking.

So is this the best preamp ever? It might be if you have a single source (though you could use a switch box), your source is 2v or higher, your IC from pre-amp to amp is less than 2m to keep capaitance low, your amp is 5kohm input or higher (most any tube amp), and your amp is relatively sensitive (1v input sensitivity or lower v would be just right). In other words, within a passive friendly system (you do have to give this some thought), this is the finest passive preamp I have ever heard, and I have has many ranging form resistor-based to TVCs and AVCs.

In my system, with my equipment, I think it is the best I have heard passive or active, but I lean towards prefering preamp neutrality and transparency, without loosing musicality, dynamics, or the handling of low bass and highs.

If you own one, what are your impressions versus anything you have heard?

Is it the best ever? I suspect for some it may be, and to say that for a $450 product makes it stupidgood.
Pubul57  (System | Threads | Answers | This Thread)

06-12-10
  Responses (101-150 of 1334)
Click title to read one, or click date to read all below it.

06-17-10   Hey milpai' you stated: "any passive converts the extr ...   Intactaudio

06-17-10   Dave, i agree with you that with a resistor-based volume con ...   Milpai

06-17-10   Actually, the voltage is 2v and 3.6v unbalanced. the manual ...   Pubul57

06-17-10   Milpai, what is this cd you talk about? is it some kind of ...   Intactaudio

06-18-10   I have to eat a little crow. i posted earlier that i prefer ...   Fiddler

06-18-10   I've been following this thread for some time. a couple of r ...   Tvad

06-18-10   Does anyone how where or how to buy this preamp. i have trie ...   Zendent7

06-18-10   Georgehifi@optusnet.com.au this is the email i use to conta ...   Clio09

06-18-10   Fiddler, i was glad to see your post, to help me rest assure ...   Pubul57

06-18-10   Does anyone how where or how to buy this preamp. i have trie ...   Zendent7

06-18-10   Oops, posted the same question twice... clio9, that is the ...   Zendent7

06-18-10   Zendent7, he's been posting here of late so i doubt he is o ...   Clio09

06-18-10   Zendent7 e-mail george thru audiogon. i also used his websit ...   Faziod

06-18-10   Zendent7 does anyone how where or how to buy this preamp. i ...   Georgelofi

06-18-10   Also zendent7 i get about 50 lighjtspeed inquiries per day, ...   Georgelofi

06-18-10   Ooops! 50 per week cheers george   Georgelofi

06-19-10   With quality products like supratek and lightspeed coming fr ...   Pubul57

06-19-10   We just let you guys in the northern hemisphere do all the g ...   Tradeontheweb

06-20-10   06-19-10: pubul57 with quality products like supratek and li ...   Georgelofi

06-21-10: Clio09
I heard a Redgum integrated recently, it sounded quite good and was well built.
Clio09  (System | Reviews | Threads | Answers | This Thread)


07-08-10   Anthony, let us know your impressions when you hear the trut ...   Pubul57

07-09-10   Hopefully will have it in a few weeks. ed schilling at the h ...   Clio09

07-09-10   You must be joking. i've just heard the lightspeed attenuato ...   Clipsal

07-09-10   Clipsal, what were the other components in the system in whi ...   Clio09

07-09-10   Not joking, but of course system matching is key as anthony. ...   Pubul57

07-09-10   Clipsal i also would like to know the poweramp used in this ...   Georgelofi

07-10-10   Why doesn't this link show up in the forum section any longe ...   Clio09

07-10-10   I noticed that too. odd.   Pubul57

07-10-10   We're back, thanks audiogon support.   Clio09

07-10-10   So we wait clipsal for the system context for you b1/lsa &qu ...   Pubul57

07-10-10   Anthony, i've read the threads about the truth preamp and it ...   Pubul57

07-11-10   What i am most curious about is how well the truth preamp wi ...   Clio09

07-11-10   George, obviously you could have made a buffered version of ...   Pubul57

07-14-10   About buffers, i will always say the best buffer is no buffe ...   Georgelofi

07-14-10   Thanks george. that is pretty much what roger modjeski (musi ...   Pubul57

08-20-10   I just started running the lightspeed off a battery power su ...   Clio09

08-23-10   I also use a lithium ion rechargable sometimes, i hear a dif ...   Georgelofi

08-23-10   Anthony, is you battery charger commercially available? have ...   Pubul57

08-23-10   Mine was made center pin negative because the wall wart geor ...   Clio09

09-02-10   If you buy this off the shelf, is it center pin positive by ...   Pubul57

09-02-10   Oh yeah, and we eagerly await your the truth comparison.   Pubul57

09-02-10   This kind of shared info is greatly appreciated. i am gettin ...   Marqmike

09-02-10   I would say any tube amp you like with 100kohm input impedan ...   Pubul57

09-02-10   if you buy what off the shelf?   Clio09

09-02-10   Marqmike: the amp should have greater than 50k input impedan ...   Clio09

09-03-10   Thanks pubul57 and clio09. my amp has input impedence of 47 ...   Marqmike

09-03-10   Hi anthony. i meant the battery and connector you provided l ...   Pubul57

09-04-10   The battery is plug and play. the link to the connectors sho ...   Clio09

09-04-10   Thank you.   Pubul57

09-04-10   I've contacted rh at "tas", and raved about the li ...   Robtn


< Prev 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 >> Next >

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password