Click title to read one, or click date to read all below it.
01-02-09
I have heard the entire line of these bad boys and they are ... Optarchie
01-02-09
Optarchie, thanks. i have rowlands 301 in my setup now. i li ... Cappuccino
01-02-09
I had the citadels and i found them a little more accurate t ... Optarchie
01-02-09
What's the retail on these? Pthai
01-02-09
Optarchie, the m1200s are $57k the pair. the m650s are $38.5 ... Essentialaudio
01-02-09
Has anybody compared karans to the like of top line from bou ... Bvdiman
01-02-09
Bvdiman, most of the amps you mention are out of question fo ... Cappuccino
01-02-09
Cappuccino, i'm just trying to get a feel of the karan sound ... Bvdiman
01-02-09
Cappuccino, sorry, previous last line i was meant to say--sh ... Bvdiman
01-02-09
For aerials, why not consider the lamm 2.2s monoblocks ? the ... Nolitan
01-02-09
Nolitan, thanks for your reply on this thread. i am sorry, b ... Cappuccino
01-02-09
Bvdiman, that's fine. i hope any who has personal experience ... Cappuccino
01-03-09
Cappuccino, fm 711mkii is supposedly to be a direct replacem ... Bvdiman
01-03-09
Bvdiman, yes, i agree. fm amps are not typical bargains! kar ... Cappuccino
01-03-09
Having said the above, a friend has actually done his round ... Bvdiman
01-03-09
Karan's amps have the bottom end control of solid state, alo ... Rtn1
01-03-09
I have never heard a big karan amp, but have owned a karan k ... Stereo
01-03-09
I will start off saying i am completely biased as we are the ... Westside_music
01-03-09
While i agree with rtn1 about the midrange and their power i ... Optarchie
01-09-09
I just have to post this as my own response to my initial po ... Cappuccino
01-09-09
Cappucino, congrates!! i was in your positioned, felt that m ... Bvdiman
01-10-09
Bvdiman, yes i know, my goal is to replace the valhalla from ... Cappuccino
01-10-09
So it's more or less similar improvements wrought with their ... Bvdiman
01-10-09
Bvdiman, yes i agree with your thoughts. i have recently inv ... Cappuccino
01-11-09
The only karan product i have experience with is the ka i-18 ... Rumadian
01-27-09
I am currently using the karan 650 mono block with my rockpo ... Voraratc
01-27-09
As this has turned, more or less, into a karan love fest.... ... Dawgcatching
02-04-09
Cappucino- do youb have 20t v1 or v2? do you use 1 pair of ... Mmike84
02-06-09
Mmike, i have 20t v1 and one pair of 301s. the 301s have dou ... Cappuccino
02-06-09
Cappuccino, did you ever get to hear the karan product and i ... Dev
02-06-09
Dev, i contacted a karan dealer in norway where i live, but ... Cappuccino
02-07-09
Dev, i don't think there are any numbers on the new dartzeel ... Husk01
02-07-09
Dev, the karan ka m1200 does sound like it may be a great pa ... Husk01
02-07-09
Hi husk01, yeah when i saw the back i was not all that impre ... Dev
02-08-09
Dev, i think the single binding post kind of kills the deal ... Husk01
02-08-09
It is worth mentioning that karan distributor avatar acoust ... Essentialaudio
02-08-09
Husk01, why does only having single binding post kill it for ... Dev
02-08-09
As always, the disclaimer that i am a dealer and the distrib ... Westside_music
02-08-09
Hi westside_music (gary) it's been nice chatting with you al ... Dev
02-08-09
Hello westside_music, my speaker cables (elrod gold signatu ... Simontju
02-08-09: Westside_music
Dev
I will have to look into this and get back to you about it. I have measured the binding post widths (WBT) and it is 5-6 mm. I tried again and can get two spades in without an issue but that of course depends on the size of the spades. I will be in touch with Karan Acoustics as to any possible options.
I understand what you say about not changing wires but I have done the comparisson of separate sets of cables versus the single (still true biwire but not separate cables) crystal ultra and I could discern no difference. I suspect it has to do with the type of insulation used. I did look up the stealth and understand their take on the topic. I too look forward to you listening and garnering your thoughts.
Simon
The Bocchino spades I am not familiar with, but did look them up. They look very impressive, is the sound commensurate? Depending on the model they are 3.5 to 4.5 mm thick so this would definitely be an issue. I am going to see what options there are, as the KA M1200s are custom built.
I will post again when I know. If you have any questions drop me a note.
Thanks to all for their interest in Karan Acoustics
Gary
Westside_music (Answers | This Thread)
02-08-09
Thank yoy gary, you can't install two sets of bocchino spad ... Simontju
02-09-09
Simon you are very welcome. the karan will accept bananas. ... Westside_music
03-30-09
I have the karan acoustics m 1200 monoblocks on my system pa ... Rtn1
03-26-10
I have the karan 450 which i am using with hovland hp100. i ... Cbsppc
08-14-10
Does anyone tried the karan amps driving mbl speakers, in pa ... Artale
|
|
