AudiogoN
Search Buy Sell Learn MyPage
 Learn > Forums > Amps Preamps > 1135306715  Start New Thread | Log In | Bookmark This
  What headphone amp to buy-Sennheiser HD 600?
Well, thanks to the kindness and patience of my fellow A'gon-izers, the hook-up "problem" for the headphone amp I have is solved. The amp is a Ramsey SHA 1. The phones are Sennheiser HD 600. I had remembered that amp sounding great. Now I'm spoiled by the new speakers I have, and even though the signal path to the amp is thru the Dodson DAC, I still think it sounds........not so great. Decent I suppose, but harsh on the upper end, yet without the mitigating detail, and you know, just.....unsatisfactory.

OK, OK, so here's the question(s): What's a great, fairly cheap (like, at LEAST less than a grand) headphone amp? Sonically, I want EVERYTHING!!!! (Except soundstage, that has never happened for me with any headphones, ever, I'm pretty sure not even with the expensive Stax I heard a few years ago).
It MUST have: Tight, deep, fast, smooth, tonally correct, musical bass, shimmering, non-fatiguing, emminently smooth yet ultra detailed highs, great midbass punch with no boom or softness whatsoever, midrange that is totally natural, smooth, detailed, and lacking any hint whatsoever of grain or electronic amplification artifact in the upper registers. It should sound great on ALL program material, from classical to rock to bluegrass to new age to jazz, anything and everything.

Other than those relatively modest criteria, there are no other performance demands. :)))

So, fire away!
Mdhoover  (Reviews | Threads | Answers | This Thread)

12-22-05
  Responses (51-98 of 98)
Click title to read one, or click date to read all below it.

01-11-06   Probably a typo on swampwalker's part, but the tube is a 6cg ...   Jax2

01-11-06   Marco: now yer talkin'!! much, much better, for my budget ...   Mdhoover

01-11-06   I think they would work with that amp. there are a couple of ...   Robm321

01-11-06   Typo yes differences btwn 404 and lambda pros were subtle. ...   Swampwalker

01-13-06   Swampwalker: looks like you may be right about audiocubes. ...   Mdhoover

01-14-06   I bought a berning personal amp for my hd 600s and have been ...   Memeboy

01-14-06   Quick update: i've decided to purchase the stax mentioned ab ...   Mdhoover

01-15-06   You cannot use the stax amp to drive conventional phones, be ...   Swampwalker

01-15-06   Swampwalker, thanks. now i know why people sometimes call t ...   Mdhoover

01-15-06   Bill, i kept the 600's because i wouldn't be able to get m ...   Robm321

01-15-06   Robm, thanks; i'm thinking of maybe keeping the sennheisers ...   Mdhoover

01-17-06   Mdhoover - here's a nice sellection of nos tubes for your ...   Jax2

01-17-06   Marco, which of those should i buy? i haven't a clue. (i s ...   Mdhoover

01-17-06   I can only speak for my preamp, which is a cary slp-50a - i ...   Jax2

01-17-06   Marco, thanks. i've emailed the same basic question to the ...   Mdhoover

02-10-06   Marco, i did it! i took your advice and bought some tubes f ...   Mdhoover

02-10-06   Great bill. post your results once you get them. i'm sure ...   Jax2

02-10-06   Marco, thanks for the quick reply. yes, the seller did have ...   Mdhoover

02-10-06   To anyone and everyone who knows about tubes (including swam ...   Mdhoover

02-10-06   Mdhoover, without a question the creek headphone amp sold b ...   Audioari1

02-10-06   Audioari1: thanks for the tip. those seem to be priced reaso ...   Mdhoover

02-11-06   Bill- if you roll tubes you will probably need to re-bias te ...   Swampwalker

02-11-06   Swampwalker, thanks for the information. tube biasing sound ...   Mdhoover

02-11-06   Bill - though it may sound complicated, it really is very si ...   Jax2

02-11-06   Marco is correct as to the procedure, however, on my 006t, i ...   Swampwalker

02-11-06   Wow! marco and swampwalker, you two guys are great! you ex ...   Mdhoover

02-15-06   marco: that sounded easy enough. when i checked, radio sha ...   Mdhoover

02-15-06   If i may chime in, the biasing is not that precise and digit ...   Swampwalker

02-16-06   I use a fluke. no need to go that direction. take swampwal ...   Jax2

02-16-06   Swampwalker and marco, thanks for the info. i'll go back t ...   Mdhoover

02-16-06   Your welcome bill. anytime. best of luck when your stax re ...   Swampwalker

02-16-06   You're welcome bill...enjoy! marco ps fluke manufactures ...   Jax2

02-16-06: Richingoth
Fluke is a manufacturer of electronic test equipment.

Since biasing is adjusting the current in milliamps of the tubes and the user is adjusting in millivolts there has to be a precision 1Ω resistior that you are measuring across.

Richingoth  (Answers | This Thread)


02-22-06   Richingoth, when you say this: does that mean that you think ...   Mdhoover

02-22-06   I am going to take a chance on revealing my ignorance and sa ...   Swampwalker

02-23-06   Mdhoover, the radio shack dmm would be just fine in this app ...   Richingoth

02-23-06   Swampwalker* and richingoth: thanks guys! that information ...   Mdhoover

02-27-06   Uh-oh, looks like my copy of the srm t1 owner's manual doesn ...   Mdhoover

02-27-06   With the price range most people here are playing with, i'm ...   Alo

02-27-06   Alo, i've considered the mf x-can tube buffer and may get on ...   Mdhoover

02-27-06   Tube buffer or headphone amp?   Alo

02-28-06   "with the price range most people here are playing with ...   Robm321

02-28-06   i suppose it would have to be both. but i just bought the s ...   Mdhoover

03-18-06   Quick update: the stax headset has returned from yamasinc, a ...   Mdhoover

01-31-07   Although the headphones look beautiful, i was mistaken that ...   Mdhoover

02-01-07   Md- please forward the final sentence of your post to my wif ...   Swampwalker

02-03-07   Now that the headphone system is up and running (i still hav ...   Mdhoover

09-08-07   Epilogue: having destroyed the diaphragms on the original l ...   Mdhoover


< Prev 1 | 2

  Post your response
Subject


Your response

No html, but you may use markup tags


Username
Members only

Password