Click title to read one, or click date to read all below it.
09-27-07
Slightly ot: has this thread set the record for most posts? ... Darkmoebius
09-27-07
Darkmoebius to set a new record i have an idea: i don't und ... Juanitox
09-27-07
Oupssssss i forget to mention that after having a chardonnay ... Juanitox
09-27-07
Darkmoebius: the original home depot/lenco thread was about ... Kgturner
09-30-07
What are the typical cartridge output specs for those using ... Tvad
09-30-07
Hi tvad, i'm using a dynavector karat 17d mk2, output .23mv, ... Dwr
09-30-07
I am using mullard 6922 (replaced the eh 6922) and the stock ... Tvad
09-30-07
The mullards are excellent tubes. i originally had the same ... Dwr
09-30-07
I love the cortese. my instinct tells me the gain is a just ... Tvad
09-30-07
...should say wright sound wp200c... Tvad
09-30-07
Yea and i should have said pcc88 tubes, not pc88, all thumbs ... Dwr
10-01-07
Hello tvad, i use the benz ace m,like yours, on my chenin. ... Amandarae
10-01-07
Hi abe. my cortese does not have a phono gain pot. it was ma ... Tvad
10-01-07
Hello tvad, i see. maybe you want to try to load the ben ... Amandarae
10-01-07
That's a good idea, abe. thank you. Tvad
10-01-07
My pleasure sir! i hope it works for you. btw, off topic ... Amandarae
10-01-07
Yes, abe. north hollywood. previously, i made several sets ... Tvad
10-01-07
Well, i tried the 24 ohm rca loading plugs, and the result w ... Tvad
10-01-07
Hello tvad, sorry to hear that it did not work for you. do ... Amandarae
10-01-07
yes, it has a slider switch, and i had the switch set to 47 ... Tvad
10-02-07
Hello tvad, it depends on the spec of your cortese. maybe ... Amandarae
10-02-07
Thanks, abe. mick and i are in contact. he doesn't seem to h ... Tvad
10-03-07
Anyone knows the output impedance of the chardonnay? will th ... Ethifi
10-03-07
fwiw, in the design of a phono section, that phono section ... Atmasphere
10-03-07
Hi tvad, if you go with another cartridge, i would get a zy ... Slowhand
10-03-07
Thanks, slowhand. my concern is chasing a cartridge to match ... Tvad
10-03-07
fwiw "voice out" in this case is not the same as ... Amandarae
10-03-07
Ethifi-i don't know the impedence,but i've used my syrah wit ... Zachzdb
10-04-07
600 ohms is my bet! Amandarae
10-04-07
The chardonnay will work well with the pass x250.5 - my syra ... Simon74
10-05-07
Guys, thanks for the inputs. Ethifi
10-06-07
Anyone own or listened to the supratek mondeuse amplifiers? ... Tvad
10-07-07
Anyone here driving electrostats with micks new amps,specifi ... Stiltskin
10-10-07
For those of you have gotten off the tube rolling merry go r ... Baranyi
10-10-07
Bob....i have a mismatched pair of tungsol black glass oval ... Stiltskin
10-10-07
Wow. those are some pricey tubes. $500 for a philips miniwa ... Tvad
10-10-07
Hi tvad,yes these prices are for real here in north america. ... Stiltskin
10-10-07
Ok, stiltskin. best of luck with your tube sales. btw, i li ... Tvad
10-10-07
I'm not selling any tubes,not right now anyway.looking back ... Stiltskin
10-10-07
Stiltskin, i was excited until getting beyond y ... Baranyi
10-11-07
Stiltskin, after you sober up you might want to try posting ... Fiddler
10-11-07
Well maybe i was alittle hasty punching in $1500.00 for the ... Stiltskin
10-13-07
Did anybody try valve art kt-66 or 350b tubes for regulator ... Snopro
10-16-07
I recently swapped power cords on the cortese. i had been us ... Tvad
10-16-07
I don't know what credence anybody here gives martin dewulf ... Zachzdb
10-18-07
Hi, does anyone here know what the blue book value is for th ... Wcheng
10-18-07
I doubt there's a blue book value for the cortese, at least ... Tvad
10-18-07
Thanks for your response tvad. i was assuming that blue boo ... Wcheng
10-18-07
Fedex trashed a htpc that i sold. i had properly insured it. ... Kgturner
10-20-07
Slowhand,baranyi how was the rocky mountain audio fest? Stiltskin
|
|
